Elastic wall distributor of outer annular falling film and its ultra-thin characteristics

LIU Rentao; ZHENG Xiaojun; ZHU Jiahua; XIA Sulan; WANG Zining

doi:10.3969/j.issn.0438-1157.2013.11.010

您当前的位置：

首页 >

文章列表页 >

Elastic wall distributor of outer annular falling film and its ultra-thin characteristics

更新时间：2025-12-10

- Elastic wall distributor of outer annular falling film and its ultra-thin characteristics
- CIESC Journal Issue 11, Pages: 3949-3955(2013)
- 作者机构：
  
  四川大学化学工程学院,四川,成都,610065
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2013.11.010
  CLC： Q051.6
- Online First：05 November 2013，
  
  Published：05 November 2013
- 稿件说明：
移动端阅览
LIU Rentao, ZHENG Xiaojun, ZHU Jiahua, et al. Elastic wall distributor of outer annular falling film and its ultra-thin characteristics[J]. CIESC Journal, 2013, (11): 3949-3955.
DOI：

LIU Rentao, ZHENG Xiaojun, ZHU Jiahua, et al. Elastic wall distributor of outer annular falling film and its ultra-thin characteristics[J]. CIESC Journal, 2013, (11): 3949-3955. DOI： 10.3969/j.issn.0438-1157.2013.11.010.

摘要

研发了竖直管外环状弹性壁降膜分布器

可以产生微米量级厚度均匀的超薄降膜流动。由弹性薄壁轴对称变形协调性决定

该布膜器具有均匀性和稳定性内在机理。理论分析导出了初始膜厚及布膜流量与布膜器内液柱高度的线性关系

并通过布膜器操作参数及降膜流量等实验数据进行了验证。实验结果表明

该布膜器对降膜管壁的润湿性能已经达到由固液界面性质决定的最小润湿流率。

Abstract

A new type of elastic wall distributor of outer annular falling film was developed.This method could create a uniform annular channel for the micron-size ultra-thin falling film flow

which could be precisely controlled.This distributor had homogeneity and stability of internal mechanism due to the axisymmetrical deformation coordination characteristics of elastic wall and it could generate negative feedback responses to fluid pressure changes sensitively.According to the theory of thin shell and Amonton law of friction

the linear relationship between initial film thickness and liquid height was given.Also

the equation of falling film flow was established.Experiments were performed using water and 30% glycerol aqueous solutions at lower flow rates.The results indicated that the two equations obtained were in good agreement with experimental data and could be used as the design equations for engineering applications. The experiments also revealed that the vertical tube with a length of 0.6 m and a diameter of 14 mm could be completely wetted by the ultra-thin falling film 0.157 mm thick using the elastic wall distributor.And the wetting performance of the distributor reached the dimensionless minimum wetting rate

which was dependent on the properties of the solid-liquid interface.Compared with other liquid distributors

the elastic wall distributor gave the best performance of hydrodynamics.

关键词

Keywords

references

Views

424

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

Review of research on liquid cooling technology for data centers

Construction and tetracycline hydrochloride degradation performance of g-C3N4/Fe3O4 microchannel reactor

Synergistic mechanism in open microchannel and jet impingement hybrid cooling system

Performance study on layered microchannel distributed throttling cryocooler with different working fluids

Related Author

TANG Songzhen

ZHANG Feiyang

YAN Ji

ZHANG Muqiao

GUO Ming

YANG Lei

YANG Hui

XU Jingfang

Related Institution

School of Mechanical and Power Engineering, Zhengzhou University

BK21 FOUR ERICA-ACE Center, Hanyang University

School of Environmental and Energy Engineering, Beijing University of Civil Engineering and Architecture

Digital Infrastructure Institute, Shanghai Posts Telecommunications Design Consulting Institute Company Limited

National Engineering Research Center for Residential Buildings and the Living Environment, China Architecture Design and Research Group

⁰