Performance of paraffin/expanded graphite composite phase change materials

HU Xiaodong; GAO Xuenong; LI Delun; CHEN Siting

doi:10.3969/j.issn.0438-1157.2013.10.047

您当前的位置：

首页 >

文章列表页 >

Performance of paraffin/expanded graphite composite phase change materials

更新时间：2025-12-10

- Performance of paraffin/expanded graphite composite phase change materials
- CIESC Journal Issue 10, Pages: 3831-3837(2013)
- 作者机构：
  
  华南理工大学化学与化工学院, 传热强化与过程节能教育部重点实验室,广东,广州,510640
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2013.10.047
  CLC： K124TQ021.3
- Online First：05 October 2013，
  
  Published：05 October 2013
- 稿件说明：
移动端阅览
HU Xiaodong, GAO Xuenong, LI Delun, et al. Performance of paraffin/expanded graphite composite phase change materials[J]. CIESC Journal, 2013, (10): 3831-3837.
DOI：

HU Xiaodong, GAO Xuenong, LI Delun, et al. Performance of paraffin/expanded graphite composite phase change materials[J]. CIESC Journal, 2013, (10): 3831-3837. DOI： 10.3969/j.issn.0438-1157.2013.10.047.

摘要

以石蜡为相变材料

利用膨胀石墨多孔网络结构

通过物理吸附法制备出石蜡/膨胀石墨复合相变材料

并通过模压法制成定形相变材料板块。采用差示扫描量热分析仪(DSC)、扫描电子显微镜(SEM)、偏光显微镜(POM)和Hot Disk 热常数分析仪等对复合相变材料进行了结构和性能的表征与测量

建立了冷/热循环实验系统以分析材料的蓄/放热性能等。结果表明:石蜡质量分数为80%的定形相变材料相变温度为27.27℃

相变焓为156.6 kJ·kg-1。制备的定形相变材料具有相变过程形状稳定、热导率高、储热密度大等特点

并具有良好的稳定性和较长的使用寿命。

Abstract

With paraffin as phase change material(PCM) and expanded graphite with network structure as matrix

a composite phase change material was prepared through physical adsorption

and was compressed to a shape-stabilized cylinder block by the compacting tool set.The prepared composite phase change material was characterized with differential scanning calorimeter(DSC)

scanning electron microscope(SEM)

polarizing optical microscope(POM)and Hot Disk thermal analyzer.In addition

an experimental system was set up to measure its thermal cycling performance.The results showed that melting temperature of the shape-stabilized phase change material with 80% mass fraction of paraffin was 27.27℃ and its phase transition enthalpy was 156.6 kJ·kg-1.The prepared shape-stabilized phase change material had many advantages over pure paraffin

such as a form-stable phase change process

higher thermal conductivity and heat storage capacity

excellent thermal stability and a longer service life.

关键词

Keywords

references

Views

391

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on thermal conductivity of paraffin-expanded graphite composite phase change materials

Experimental study on phase change heat storage and release performance of R-134a pulsating heat pipe

Development and properties of PEG-EG solid-solid phase change materials

Preparation and characterization of paraffin Pickering emulsion without subcooling phenomenon

Study on microwave enhanced removal performance of organic matter in coking waste salt

Related Author

HU Dinghua

LI Qiang

XU Xiaoyong

LIN Ken

Dinghua HU

Ken LIN

Xiaoyong XU

Qiang LI

Related Institution

School of Energy and Power Engineering, Nanjing University of Science and Technology

School of Energy and Power Engineering, Shandong University

Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University

College of Chemistry and Chemical Engineering, Xiamen University

Shenzhen Minshun Primary School

⁰