Heat and mass transfer of filamentous particles in a fixed bed

ZHU Liping; YUAN Zhulin; YAN Yaming; LUO Dengshan; WANG Hongsheng; LI Bin

doi:10.3969/j.issn.0438-1157.2013.08.005

您当前的位置：

首页 >

文章列表页 >

Heat and mass transfer of filamentous particles in a fixed bed

更新时间：2025-12-10

- Heat and mass transfer of filamentous particles in a fixed bed
- CIESC Journal Issue 8, Pages: 2736-2744(2013)
- 作者机构：
  
  1. 东南大学能源热转换及其过程测控教育部重点实验室, 能源与环境学院,江苏,南京,210096
  2. 郑州烟草研究院烟草行业烟草工艺重点实验室,河南,郑州,450001
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2013.08.005
  CLC： Q536
- Online First：05 August 2013，
  
  Published：05 August 2013
- 稿件说明：
移动端阅览
ZHU Liping, YUAN Zhulin, YAN Yaming, et al. Heat and mass transfer of filamentous particles in a fixed bed[J]. CIESC Journal, 2013, (8): 2736-2744.
DOI：

ZHU Liping, YUAN Zhulin, YAN Yaming, et al. Heat and mass transfer of filamentous particles in a fixed bed[J]. CIESC Journal, 2013, (8): 2736-2744. DOI： 10.3969/j.issn.0438-1157.2013.08.005.

摘要

目前对于固定床中丝状填充颗粒传热传质特性的认识仍处于初始阶段。为了能够从颗粒尺度的微观层面揭示丝状颗粒与气体、颗粒与颗粒之间的热、质传递机理

建立了一种丝状颗粒传热传质数学模型

之后将离散单元法与计算流体力学相结合

对实验中较难获得的床层局部流动及传递信息进行了数值模拟

并着重分析比较了气流入口温度以及表观气速等关键因素对固定床中丝状颗粒温度和含水率变化的影响规律。通过模拟结果与实验数据的对比

验证了所建模型的可行性。研究结果表明:同一时刻

固定床中颗粒温度大体上是随着床层高度的增加而降低

含水率则是随着床层高度的增加而升高;气流入口温度对于固定床中丝状颗粒平均温度的提升起着主导作用

而颗粒的传质速度则受表观气速的影响更为明显。

Abstract

The knowledge on the heat and mass transfer characteristics of filamentous particles in a fixed bed is preliminary.This paper describes a numerical model for microscopic heat and mass transfer mechanisms between particles and between gas and particles at particle scale.The CFD-DEM coupled approach was employed to numerical study on the local flow and transfer information in the fixed bed

which is difficult to obtain from experiment.The critical factors influencing the temperature and moisture content distribution in a fixed bed such as the air inlet temperature and superficial gas velocity were examined.The model was validated by comparing the simulation results with experimental data.It is concluded that the temperature of filamentous particles reduces and the moisture content of particles increases with the increase of bed height.The air inlet temperature plays a dominant role in the average temperature of the bed

and the mass transfer rate of filamentous particles is affected more obviously by the superficial gas velocity.

关键词

Keywords

references

Views

403

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on heat and mass transfer and nonlinear characteristics with heat and mass source in cavity

Analysis of heat and mass transfer in two-layer sintering process

Numerical analysis of reaction process and flow field in fixed bed of methanation reactor

Numerical simulation of double-diffusive capillary convection in shallow annular pool with capillary ratio of -1

Model of heat transfer in filamentous granular materials based on discrete element method

Related Author

Yubing LI

Mo YANG

Tingkang LU

Zhenghua DAI

ZHANG Bin

ZHOU Jiemin

LI Mao

CHENG Yuanhong

Related Institution

School of Energy and Power Engineering, University of Shanghai for Science and Technology

Pudong New Area Special Equipment Supervision and Inspection Institution

School of Energy Science and Engineering, Central South University

Key Laboratory of Coal Cleaning Conversion and Chemical Engineering Process, College of Chemistry and Chemical Engineering, Xinjiang University

Key Laboratory of Low-grade Energy Utilization Technologies and Systems of Ministry of Education, College of Power Engineering, Chongqing University

⁰