Heat transfer characteristic of longitudinal externally-finned tube in closed space

QIU Yan; TIAN Maocheng; LENG Xueli

doi:10.3969/j.issn.0438-1157.2013.07.014

您当前的位置：

首页 >

文章列表页 >

Heat transfer characteristic of longitudinal externally-finned tube in closed space

更新时间：2025-12-10

- Heat transfer characteristic of longitudinal externally-finned tube in closed space
- CIESC Journal Issue 7, Pages: 2405-2410(2013)
- 作者机构：
  
  山东大学能源与动力工程学院,山东,济南,250061
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2013.07.014
  CLC： K124
- Online First：05 July 2013，
  
  Published：05 July 2013
- 稿件说明：
移动端阅览
QIU Yan, TIAN Maocheng, LENG Xueli. Heat transfer characteristic of longitudinal externally-finned tube in closed space[J]. CIESC Journal, 2013, (7): 2405-2410.
DOI：

QIU Yan, TIAN Maocheng, LENG Xueli. Heat transfer characteristic of longitudinal externally-finned tube in closed space[J]. CIESC Journal, 2013, (7): 2405-2410. DOI： 10.3969/j.issn.0438-1157.2013.07.014.

摘要

对封闭空间内的竖直纵向外翅片管在翅片长度、翅片夹角及基管壁温改变时的自然对流条件下的换热特性进行了三维数值研究。结果表明翅片管的单位质量散热量随翅片长度的增加而增大。在翅片长度一定时

其最大值大多出现在翅片夹角60°左右;在基管壁温升高时

对流占据比重出现极大值;在考虑翅片夹角对换热影响的基础上引入量纲1因子

依据65种算例结果拟合出竖直纵向外翅片管自然对流换热准则关系式

准则式与计算结果偏差平均为3.53%。

Abstract

A three-dimensional numerical study was carried out to investigate effects of fin angle

fin length

and tube wall temperature in natural convection on heat transfer enhancement for a longitudinal externally-finned tube placed vertically in a closed space.The numerical results show that the heat transfer rate per unit mass increases with fin length.The maximum heat transfer rate per unit mass occurs when the fin angle is about 60° for all the fin angles investigated.With increasing tube wall temperature

the maximum ratio of the natural convection occurs in the temperature range studied.In order to consider the effect of fin angle on heat transfer enhancement

the dimensionless factor d/H is introduced.The natural convection heat transfer criterion of longitudinal externally-finned tube in vertical is fitted based on 65 computational cases and the mean error is 3.53% between the criterion and simulations.

关键词

Keywords

references

Views

289

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Flow boiling heat transfer of phase separation structure microchannels under pulsating pressure

Preparation and heat transfer enhancement of phase change slurry with multi-phase change temperature

Research progress on heat transfer enhancement mechanism of spray cooling technology

Heat transfer and flow characteristics of nanofluids in microchannels

Investigation of enhanced boiling heat transfer on porous structural surfaces by high voltage electric field

Related Author

LUO Xiaoping

XIAO Lan

ZHANG Jiayu

FAN Jiayuan

ZENG Wenhui

REN Zhichao

ZHANG Wentao

LYU Shuang

Related Institution

School of Mechanical and Automotive Engineering, South China University of Technology

State Grid Sichuan Electric Power Company Economic and Technological Research Institute

School of Energy and Power Engineering, Jiangsu University

School of Mechatronics Engineering, Anhui University of Science and Technology

State Key Laboratory of Fine Chemicals, Liaoning Key Laboratory of Clean Utilization of Chemical Resources, School of Chemical Engineering, Dalian University of Technology

⁰