Simulation and optimization of SNCR process

LI Qiong; WU Yuxin; YANG Hairui; LÜ Junfu

doi:10.3969/j.issn.0438-1157.2013.05.039

您当前的位置：

首页 >

文章列表页 >

Simulation and optimization of SNCR process

更新时间：2025-12-10

- Simulation and optimization of SNCR process
- CIESC Journal Issue 5, Pages: 1789-1796(2013)
- 作者机构：
  
  清华大学热能工程系热科学与动力工程教育部重点实验室,北京,100084
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2013.05.039
  CLC： 5
- Online First：05 May 2013，
  
  Published：05 May 2013
- 稿件说明：
移动端阅览
LI Qiong, WU Yuxin, YANG Hairui, et al. Simulation and optimization of SNCR process[J]. CIESC Journal, 2013, (5): 1789-1796.
DOI：

LI Qiong, WU Yuxin, YANG Hairui, et al. Simulation and optimization of SNCR process[J]. CIESC Journal, 2013, (5): 1789-1796. DOI： 10.3969/j.issn.0438-1157.2013.05.039.

摘要

对某台使用尿素为还原剂的100 t·h-1循环流化床锅炉的SNCR性能进行了CFD数值模拟

分析了温度、氨氮摩尔比等影响因素对SNCR脱硝效率、氨泄漏以及N2O浓度的影响规律。结果表明

SNCR最佳温度窗口的范围为850~1050℃

且随着氨氮比的增大

温度窗口范围变宽;随着温度的升高

氨逃逸量明显下降

当温度超过940℃后

氨逃逸量基本可以忽略不计

而N2O的生成量则呈现出先增大后减少的趋势。随着氨氮摩尔比的增加

脱硝效率逐渐增大

980℃左右达到峰值;氨泄漏随氨氮摩尔比的增加而增大;N2O浓度与脱硝效率呈正比关系

最大生成量约为30 μl·L-1。

Abstract

Using computational fluid dynamics(CFD)method

the urea-based selective non-catalytic reduction(SNCR)process in a 100 t·h-1 circulating fluidized bed(CFB)boiler was numerically simulated to study effect of temperature and normalized stoichiometric ratio(NSR)on SNCR denitration efficiency

NH3 slip and N2O formation.The results show that the window of optimized temperature for SNCR process is in a range of 850-1050℃ and becomes wider with increasing NSR; when temperature rises

NH3 slip decreases obviously and can be ignored if temperature is higher than 940℃.With increase of temperature

amount of N2O formation increases first and then decreases.With increasing NSR

the denitration efficiency and NH3 slip increase.The denitration efficiency is the maximum at 980℃.Formation of N2O is in proportion to denitration efficiency and the maximum about 30 μl·L-1.

关键词

Keywords

references

Views

466

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Removal of marine diesel engine exhaust pollutants with DOC+SCR technologies

Liquid film flow and heat transfer model under spray impact

Mixed matrix membranes based on nitrogen-rich Schiff base network polymer and their CO2 separation performance

Recent advances in machine learning for modeling and control of crystallization processes

Study on the residence time distribution characteristics of the TPMS-Diamond static mixer

Related Author

WANG Zongyu

KUANG Hailang

ZHANG Jifeng

JI Yulong

QI Hang

ZHANG Wei

GONG Liang

Related Institution

College of Marine Engineering, Dalian Maritime University

College of Pipeline and Civil Engineering, China University of Petroleum

⁰