Quenching boiling of aqueous suspensions with carbon nanotubes

LI Danyang; ZHU Yuanzheng; ZHANG Liang; FAN Liwu; XU Xu; YU Zitao; HONG Ronghua; HU Yacai

doi:10.3969/j.issn.0438-1157.2013.05.009

您当前的位置：

首页 >

文章列表页 >

Quenching boiling of aqueous suspensions with carbon nanotubes

更新时间：2025-12-10

- Quenching boiling of aqueous suspensions with carbon nanotubes
- CIESC Journal Issue 5, Pages: 1566-1572(2013)
- 作者机构：
  
  1. 浙江大学热工与动力系统研究所,浙江,杭州,310027
  2. 中国计量学院计量测试工程学院,浙江,杭州,310018
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2013.05.009
  CLC： K124
- Online First：05 May 2013，
  
  Published：05 May 2013
- 稿件说明：
移动端阅览
LI Danyang, ZHU Yuanzheng, ZHANG Liang, et al. Quenching boiling of aqueous suspensions with carbon nanotubes[J]. CIESC Journal, 2013, (5): 1566-1572.
DOI：

LI Danyang, ZHU Yuanzheng, ZHANG Liang, et al. Quenching boiling of aqueous suspensions with carbon nanotubes[J]. CIESC Journal, 2013, (5): 1566-1572. DOI： 10.3969/j.issn.0438-1157.2013.05.009.

摘要

为了研究表面粗糙度及浓度对纳米悬浮液大容器沸腾特性的耦合影响

对粗糙度为Ra0.5和Ra12.5的镀镍铜球在体积分数为0.1%和0.5%的水基碳纳米管悬浮液中的淬火过程进行了实验研究

得到了不同条件下的淬火曲线并通过集总参数模型得到了淬火过程的沸腾曲线。结果表明

悬浮液浓度与表面粗糙度的增加都能加快淬火速率并提高临界热通量。表面粗糙度的增加缩短了核态沸腾阶段的时间

而悬浮液浓度的增加则主要体现了对膜态沸腾阶段的加速作用。在二者的共同影响下

采用表面较为粗糙的淬火物体在浓度较高的纳米悬浮液中进行淬火可以显著地缩短淬火冷却时间

对工程应用具有指导意义。

Abstract

In order to examine the combined effects of surface roughness and concentration on pool boiling of nanoparticle suspensions

an experimental study on quenching processes of aqueous suspensions with carbon nanotubes(0.1% and 0.5%)was conducted using nickel-plated copper spheres with surface roughness of Ra0.5 and Ra12.5.Quenching curves were acquired directly and boiling curves during the quenching processes were calculated based on a lumped capacitance model.It is shown that increase in both concentration of suspensions and surface roughness expedites quenching speed and enhances critical heat flux.Increase in surface roughness decreases the time duration of nucleate boiling and less film boiling time is primarily due to increased concentration.The combined effects of surface roughness and concentration suggest that quenching objects are utilized with rough surfaces in nanoparticle suspensions of relatively high concentration so as to significantly shorten the quenching time for engineering applications.

关键词

Keywords

references

Views

379

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Heat transfer capacity of spray cooling under vibration environment

Experimental study on the downward-facing surface enhanced boiling heat transfer of multiscale groove-fin structures

Turbulence characteristics of compliant foil gas seal considering surface roughness

Research on enhanced boiling heat transfer of multilevel composite wick structure

Research progress on basic theory and improvement technology for critical heat flux of microchannel

Related Author

ZHAO Xiucong

ZHOU Hang

ZHANG Meng

QIAN Yuqi

HUANG Jinzuo

LI Zhaohua

CHEN Xinwen

LIAN Xuexin

Related Institution

College of Mechanical Engineering, Yangzhou University

Beijing Key Laboratory of Passive Nuclear Power Safety and Technology, North China Electric Power University

School of Nuclear Science and Engineering, Shanghai Jiao Tong University

Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology

School of Energy and Power Engineering, Nanjing University of Science and Technology

⁰