Periodic laminar flow and heat transfer in square channel

WANG Jiansheng; XU Yong

doi:10.3969/j.issn.0438-1157.2013.05.006

您当前的位置：

首页 >

文章列表页 >

Periodic laminar flow and heat transfer in square channel

更新时间：2025-12-10

- Periodic laminar flow and heat transfer in square channel
- CIESC Journal Issue 5, Pages: 1541-1548(2013)
- 作者机构：
  
  天津大学机械工程学院, 中低温热能高效利用教育部重点实验室,天津,300072
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2013.05.006
  CLC： K124
- Online First：05 May 2013，
  
  Published：05 May 2013
- 稿件说明：
移动端阅览
WANG Jiansheng, XU Yong. Periodic laminar flow and heat transfer in square channel[J]. CIESC Journal, 2013, (5): 1541-1548.
DOI：

WANG Jiansheng, XU Yong. Periodic laminar flow and heat transfer in square channel[J]. CIESC Journal, 2013, (5): 1541-1548. DOI： 10.3969/j.issn.0438-1157.2013.05.006.

摘要

应用数值模拟方法分析了以周期性方式布置不同节距比(PR=L/H)、倾角为45°挡板槽道的流动特性与传热特性。挡板在槽道上下壁面对齐布置高度比(BR=b/H)为0.2

以便在槽道内部形成一对沿流向的反向旋涡。数值模拟计算Reynolds数范围为100~1000

流体介质为空气。计算结果表明:布置斜置挡板后

在槽道内诱导产生了沿流向的旋涡流

且在测试段中旋涡流冲击槽道上下壁面和槽道一侧壁面

结果使得传热效率提高;分析了范围内平均Nusselt数比Nu/Nu0、摩擦系数比f/f0及传热增强系数η随节距比PR和Reynolds数的变化关系

并建立了相应的准则关系式;当挡板间节距比为0.5时

传热增强系数可达最大值3.0。

Abstract

A numerical investigation is conducted to examine laminar periodic flow and heat transfer characteristics in a square channel fitted with 45? inclined baffle inserted periodically in the channel.Air is the working fluid with the flow rate in terms of Reynolds number based on the channel hydraulic diameter ranging from 100 to 1000.The utilization of the 45? inclined baffles is to create counter-rotating vortex flows having a significant influence on the flow laminar intensity

enhancing heat transfer in the channel.Effects of different pitch ratios(PR=L/H)with a baffle height ratio(BR=b/H)of 0.2 on heat transfer and pressure loss in the channel were examined.The results show that the baffles create pair of vortex flows

inducing impingement flows on a side and the upper and lower walls and increasing heat transfer rate over the test channel substantially.An analysis on the averaged Nusselt number ratio

friction factor ratio and thermal enhancement factor with the change of pitch ratio and Reynolds number is used for establishing the corresponding criterion correlation.The computation reveals that the optimum thermal performance enhancement factor of about 3.0 is found at PR=0.5.

关键词

Keywords

references

Views

464

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Enhanced heat transfer and flow resistance characteristics of twisted tube double-pipe heat exchangers

Influence of micro-rib structures on thermal performance of nanofluids flowing around circular cylinders

Comparative analysis of laminar flow and heat transfer characteristics in a circular tube with different shape vortex generators

Investigations of axial conduction effect on local heat transfer performance in PCHE

Heat transfer characteristics of salt-bath structure heat exchanger in ascension pipe of coke oven

Related Author

YIN Yingde

NONG Yashan

LI Yuanyu

LIU Shijie

QI Cong

LI Ke'ao

LI Chunyang

WU Yonghe

Related Institution

School of Architecture and Transportation Engineering, Guilin University of Electronic Technology

Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences

School of Electrical and Power Engineering, China University of Mining and Technology

School of Mechanical Engineering, Lanzhou Jiaotong University

Key Laboratory of Railway Vehicle Thermal Engineering, Ministry of Education

⁰