Hydrophobic copper phthalocyanine blue organic pigment (PB) can be effectively encapsulated by co-poly(styrene-acrylate)via in-situ micro-suspension polymerization.In order to adjust and control the morphology of pigment microcapsules
the effects of homogenization shear rate
agitation speed
dispersant TCP amount and pigment concentration on the particles size and size distribution of polymerization products were investigated.It was found that there was a critical agitation speed of 250 r·in-1 for achieving a stable size and size distribution of dispersed phase during polymerization.TCP amount had a significant effect on the stability of micro-suspension system but a limited effect on particle size control.Homogenization shear rate played an obvious role in controlling particle size
while the effect of pigment concentration on particle size was not obvious.Thus a series of pigment microcapsules with controllable particle size
narrow distribution and high pigment content could be obtained.
Preparation of submicron polystyrene particles by micro-suspension polymerization with ultrasonic homogenization
Prediction model for COD in petrochemical wastewater influent based on temporal-spatial dual-stream convolutional neural network
Study on microwave enhanced removal performance of organic matter in coking waste salt
Thermodynamic study of germanium-impurity competitive deposition in GeCl4-MxCly-H2 system
A two-stage dual-channel deep learning model for chemical fault classification
Related Author
QI Dongming
ZHAO Xiaoli
CHEN Zhijie
WU Minghua
Related Institution
Engineering Research Center of Eco-Dyeing and Finishing of Textiles of Ministry of Education, Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, Zhejiang Sci-Tech University