Preparation of carbon-based monolith with macro-pore from chitosan and its adsorption performance for trace SO<sub>2</sub>

WAN Peng; ZHANG Hua; YU Chang; QIU Jieshan

doi:10.3969/j.issn.0438-1157.2013.01.042

您当前的位置：

首页 >

文章列表页 >

Preparation of carbon-based monolith with macro-pore from chitosan and its adsorption performance for trace SO₂

更新时间：2025-12-10

- Preparation of carbon-based monolith with macro-pore from chitosan and its adsorption performance for trace SO₂
- CIESC Journal Issue 1, Pages: 357-364(2013)
- 作者机构：
  
  大连理工大学能源材料化工辽宁省重点实验室,大连理工大学精细化工国家重点实验室,辽宁,大连,116024
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2013.01.042
  CLC： Q028.1+5
- Online First：05 January 2013，
  
  Published：05 January 2013
- 稿件说明：
移动端阅览
WAN Peng, ZHANG Hua, YU Chang, et al. Preparation of carbon-based monolith with macro-pore from chitosan and its adsorption performance for trace SO₂[J]. CIESC Journal, 2013, (1): 357-364. DOI: 10.3969/j.issn.0438-1157.2013.01.042.
DOI：

WAN Peng, ZHANG Hua, YU Chang, et al. Preparation of carbon-based monolith with macro-pore from chitosan and its adsorption performance for trace SO₂[J]. CIESC Journal, 2013, (1): 357-364. DOI: 10.3969/j.issn.0438-1157.2013.01.042. DOI：

摘要

以壳聚糖为碳源

综合采用冰模板技术和低温热解炭化技术

制备出具有蜂窝状孔结构特征的大孔炭质整体材料

研究了此类新材料对痕量二氧化硫的吸附性能及再生能力。结果表明

大孔炭质整体材料蜂窝状孔结构的形成及其规整程度与冰模板过程的冷冻时间等因素密切相关;200℃下低温热处理可得到具有丰富表面含氮官能团的大孔炭质整体材料;经氨水溶液中的离子交换功能化处理后

该大孔炭质整体材料对低浓度SO2的吸附容量显著提高

可达到57 mg·g-1;吸附饱和后

经空气简单吹扫处理

大孔炭质整体材料即可大部分再生

少数不可再生部分是由于质子化的氨基与亚硫酸根和硫酸根在吸附过程中形成了不可逆化学吸附产物季铵盐所致。壳聚糖基大孔炭质整体吸附剂材料有望在污染空气的脱硫净化

特别是在质子交换膜燃料电池的阴极空气脱硫净化方面发挥重要作用。

Abstract

Chitosan-based monolithic carbon materials (CBMCMs) with three-dimensional macro-porous honeycomb structure have been prepared by coupling ice templating process with a low-temperature heat treatment one

of which the adsorption and regeneration performance for trace SO2 in air were evaluated.It is found that formation of macro-porous structure can be tuned by varying the freezing time

and low temperature pyrolysis

such as 200℃

favors the retain of abundant surface nitrogen functional group in as-made CBMCMs.After ion-exchange treatment in ammonia solution

the adsorption capacity for trace SO2 of the CBMCMs is greatly enhanced

as high as 57 mg·g-1.The exhausted CBMCMs can be partially regenerated simply by air purge at room temperature.The unrecoverable part is due to the formation of ammonium salts from protonated amine group and sulfite and sulfate ions

as the product of irreversible adsorption.It is believed that after further optimization

the CBMCM materials reported here will be of potential in air cleaning for efficient removal of SOx species

especially for cathode air desulfurization in proton exchange membrane fuel cells.

关键词

Keywords

references

Views

487

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Preparation and adsorption properties of temperature sensitive poly(N-isopropylacrylamide) /monosodium glutamate/ chitosan composites

Implication and enhancement mechanism of chitosan-assisted enzyme- induced carbonate precipitation for copper wastewater treatment

Molecular simulation on doxorubicin encapsulation and transport by chitosan-boron nitride nanotubes

Synthesis of magnetic nanoparticles with core-shell structure and its drug loading properties

Characteristics of boron adsorption onto a novel chitosan/zirconium composite particles

Related Author

LYU Gaoying

MU Chaoqun

ZHANG Liang

ZHANG Zhiqiang

XU Haoyang

HE Zhixian

WANG Ting

XU Yinlong

Related Institution

Department of Materials and Chemical Engineering, Zhengzhou University of Light Industry

School of Chemistry and Chemical Engineering, Xi'an University of Architecture and Technology

School of Civil Engineering, Xi'an University of Architecture and Technology

Shaanxi Key Laboratory of Geotechnical and Underground Space Engineering (XAUAT)

Department of Chemistry, Zhejiang Sci-Tech University

⁰

Preparation of carbon-based monolith with macro-pore from chitosan and its adsorption performance for trace SO2

DOI：10.3969/j.issn.0438-1157.2013.01.042

摘要

Abstract

关键词

Keywords

references

Preparation of carbon-based monolith with macro-pore from chitosan and its adsorption performance for trace SO₂