Dynamic DO simulation for aerobic nitrification process in SBR with constant aeration intensity: model identification and K<sub>L</sub>a determination

ZHU Ao; GUO Jianhua; WANG Shuying; PENG Yongzhen

doi:10.3969/j.issn.0438-1157.2012.12.044

您当前的位置：

首页 >

文章列表页 >

Dynamic DO simulation for aerobic nitrification process in SBR with constant aeration intensity: model identification and K_La determination

更新时间：2025-12-10

- Dynamic DO simulation for aerobic nitrification process in SBR with constant aeration intensity: model identification and K_La determination
- CIESC Journal Issue 12, Pages: 4048-4054(2012)
- 作者机构：
  
  北京工业大学北京市水质科学与水环境恢复工程重点实验室, 北京市污水脱氮除磷处理与过程控制工程技术研究中心,北京,100124
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2012.12.044
  CLC： 703
- Online First：04 September 2012，
  
  Published：04 September 2012
- 稿件说明：
移动端阅览
ZHU Ao, GUO Jianhua, WANG Shuying, et al. Dynamic DO simulation for aerobic nitrification process in SBR with constant aeration intensity: model identification and K_La determination[J]. CIESC Journal, 2012, (12): 4048-4054. DOI: 10.3969/j.issn.0438-1157.2012.12.044.
DOI：

ZHU Ao, GUO Jianhua, WANG Shuying, et al. Dynamic DO simulation for aerobic nitrification process in SBR with constant aeration intensity: model identification and K_La determination[J]. CIESC Journal, 2012, (12): 4048-4054. DOI: 10.3969/j.issn.0438-1157.2012.12.044. DOI：

摘要

通过简化活性污泥法1号模型(activated sludge model No.1

ASM1)建立两步硝化反应的数学模型

实现了对序批式反应器(sequencing batch reactor

SBR)恒曝气量好氧过程中溶解氧(dissolved oxygen

DO)动态变化过程的数学模拟

模型辨识科学地区分了可以直接取值的参数包括产率系数、DO饱和常数(或底物饱和常数)和需要重新估计的参数。采用文献推荐参数值模拟了过程中主要状态变量的动力学过程

模拟结果呈现出了多个DO平台

这与实际反应结果数据相符

验证了所建模型的正确性。优化实验设计

获取了典型SBR恒曝气好氧硝化过程动态DO数据

通过理论分析和对数据进行二阶微分处理提出了确定总氧传递系数KLa和相对饱和溶解氧SOeq的简单方法

为后续参数估计奠定了基础。

Abstract

A two-step nitrification model was built by simplifying the standard activated sludge model No.1

and dynamic dissolved oxygen(DO)simulation can be done for aerobic nitrification process in a sequencing batch reactor(SBR)with constant aeration intensity.The parameters in the model could be distinguished into two groups by model identification:in a group parameter values can be directly obtained

including yield coefficient

DO saturation coefficient(or substrate coefficient)

and in other group parameter values needed to be estimated by optimization algorithm.Adopting the parameter values recommended by literatures

dynamic processes were simulated for important process variables

which revealed multi-DO levels and fitted well with the real response trend in SBR operation.Optimal experimental design method was employed for obtaining dynamic DO data of aerobic nitrification process in the SBR with typical aeration intensity

from which the values of KLa and SOeq could be determined by theoretical analysis and second order differential treatment of these data.Then

further parameter estimation could be optimal based on the model identification and KLa determination.

关键词

Keywords

references

Views

230

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Dynamic DO simulation of aerobic nitrification in SBR with constant aeration intensity:parameter estimation and accuracy assessment

Recent advances in machine learning for modeling and control of crystallization processes

Performance analysis and application of thermal and humidity control system cascade driven by waste heat

Thermo-gas-elastic coupling performance analysis of high-speed and high-temperature foil face seals

Study on the residence time distribution characteristics of the TPMS-Diamond static mixer

Related Author

No data

Related Institution

No data

⁰

Dynamic DO simulation for aerobic nitrification process in SBR with constant aeration intensity: model identification and KLa determination

DOI：10.3969/j.issn.0438-1157.2012.12.044

摘要

Abstract

关键词

Keywords

references

Dynamic DO simulation for aerobic nitrification process in SBR with constant aeration intensity: model identification and K_La determination