Numerical study on Mg/MgH<sub>2</sub> thermochemical heat storage system

GU Qingzhi; ZHAO Changying

doi:10.3969/j.issn.0438-1157.2012.12.006

您当前的位置：

首页 >

文章列表页 >

Numerical study on Mg/MgH₂ thermochemical heat storage system

更新时间：2025-12-10

- Numerical study on Mg/MgH₂ thermochemical heat storage system
- CIESC Journal Issue 12, Pages: 3776-3783(2012)
- 作者机构：
  
  上海交通大学工程热物理研究所,上海,200240
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2012.12.006
  CLC： K02
- Online First：03 September 2012，
  
  Published：03 September 2012
- 稿件说明：
移动端阅览
GU Qingzhi, ZHAO Changying. Numerical study on Mg/MgH₂ thermochemical heat storage system[J]. CIESC Journal, 2012, (12): 3776-3783. DOI: 10.3969/j.issn.0438-1157.2012.12.006.
DOI：

GU Qingzhi, ZHAO Changying. Numerical study on Mg/MgH₂ thermochemical heat storage system[J]. CIESC Journal, 2012, (12): 3776-3783. DOI: 10.3969/j.issn.0438-1157.2012.12.006. DOI：

摘要

蓄热系统是解决热量供需不匹配的有效方式之一。根据热量储存原理的不同

可以将系统分为显热、潜热和热化学蓄热三种类型

其中热化学蓄热有其独特的优点。基于镁-氢化镁热化学蓄热系统蓄放热时的物理化学过程

建立了系统的二维非稳态数学模型

考虑了不同边界条件对系统的影响

通过数值计算

获得了系统的温度、反应速率、反应进度分布及系统的对外放热功率。研究结果表明:系统的蓄热密度为0.85 kW·h·(kg Mg)-1

热量的传递是影响系统蓄放热效率的关键因素之一

并且当边界对流传热系数保持一定时

存在一个最佳的外界流体温度

使系统的平均放热功率达到最大。在系统以定壁温为边界条件时

系统最大的平均放热功率/质量值为0.79 kW·(kg Mg)-1。

Abstract

Heat storage systems are used to reduce the mismatch between heat supply and heat demand. Compared to sensible and latent heat storage

thermochemical heat storage has two major advantages:high heat storage density and long-period storage capability at ambient temperature without extra thermal insulation.In this study

the thermal behavior of Mg/MgH2 thermochemical heat storage system is numerically investigated.A mathematical model for considering the exothermic process of heat storage is developed

and the influence of different boundary conditions is examined.The results indicate that heat transfer plays a key role in overall thermochemical heat storage efficiency

and an optimum reaction temperature exists which leads to a maximum discharging power for a given heat transfer coefficient.When the boundary condition is constant wall temperature

the system has a maximum discharging power 0.79 kW?(kg Mg)-1.

关键词

Keywords

references

Views

302

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on the characteristics and mechanisms of secondary explosions involving deposited magnesium hydride dust induced by hydrogen explosions

Physics-informed spatio-temporal graph convolutional network for fermentation processes

Experimental study of heat transfer enhancement by pressure waves in cross flow tube bundles

Thermo-oxidative degradation characteristics of TPT backsheet from end-of-life photovoltaic modules

Study on dissolution kinetics of erythromycin thiocyanate

Related Author

DIAO Shoutong

LI Haitao

YU Minggao

WANG Jiachen

YAO Yihao

Hu Gege

WEI Chengcai

Related Institution

School of Resources and Safety Engineering,Chongqing University

National Innovation Center for Industry-Education Integration of Energy Storage Technology, Chongqing University

⁰

Numerical study on Mg/MgH2 thermochemical heat storage system

DOI：10.3969/j.issn.0438-1157.2012.12.006

摘要

Abstract

关键词

Keywords

references

Numerical study on Mg/MgH₂ thermochemical heat storage system