Inverse heat transfer algorithm for liquid-level detection of storage tank based on infrared imaging temperature measurement

SHI Hongchen; ZHANG Xiaohuai; SUN Fengrui; YANG Li; WANG Weiqing

doi:10.3969/j.issn.0438-1157.2012.12.005

您当前的位置：

首页 >

文章列表页 >

Inverse heat transfer algorithm for liquid-level detection of storage tank based on infrared imaging temperature measurement

更新时间：2025-12-10

- Inverse heat transfer algorithm for liquid-level detection of storage tank based on infrared imaging temperature measurement
- CIESC Journal Issue 12, (2012)
- 作者机构：
  
  海军工程大学动力工程学院,湖北,武汉,430033
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2012.12.005
  CLC： K124
- Online First：27 July 2012，
  
  Published：27 July 2012
- 稿件说明：
移动端阅览
SHI Hongchen, ZHANG Xiaohuai, SUN Fengrui, et al. Inverse heat transfer algorithm for liquid-level detection of storage tank based on infrared imaging temperature measurement[J]. CIESC Journal, 2012, (12).
DOI：

SHI Hongchen, ZHANG Xiaohuai, SUN Fengrui, et al. Inverse heat transfer algorithm for liquid-level detection of storage tank based on infrared imaging temperature measurement[J]. CIESC Journal, 2012, (12). DOI： 10.3969/j.issn.0438-1157.2012.12.005.

摘要

传统的利用红外热像仪进行储罐液位的检测主要是基于对红外图像进行数字处理

因此测量精度不高。通过建立储罐的传热模型

利用有限体积法

对筒体外表面的温度分布进行了数值模拟

并提出了基于筒体外表面温度分布对筒内液位进行定量识别的传热反问题方法

同时分析了初始假设、测量误差(σ)和最大温差对液位识别精度的影响。结果表明:在工程允许的测量误差范围内(σ=2℃)

利用红外热像仪检测储罐外表面温度反演估计储罐液位和罐内流体温度有较高的识别精度

误差在2%以内。该方法为储罐液位和内部温度识别提供了一种新的思路和途径。

Abstract

The traditional liquid-level detection method for storage tank by using thermal infrared imager is mainly digital image processing

so the measurement accuracy is not high.In this paper

a mathematical model of heat transfer in storage tank is built and the temperature distribution of external surface of the tank is solved by finite volume method.An inverse heat transfer algorithm for quantitative identification of liquid-level in storage tank is proposed based on the temperature distribution of external surface of the tank and the effects of initial guess

measurement error(σ)and maximum surface temperature difference on the level detection results are investigated.The results show that within the range of acceptable measurement error in engineering applications(σ=2℃)

the inversion liquid-level has a high accuracy

with relative error less than 2%.It provides a new thought and a way for the liquid-level detection for storage tank.

关键词

Keywords

references

Views

790

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Stress analysis of LNG storage tank for ships under inertial force

Simulation of pre-cooling of a liquefied natural gas storage tank

Thermo-oxidative degradation characteristics of TPT backsheet from end-of-life photovoltaic modules

Study on microwave enhanced removal performance of organic matter in coking waste salt

Identification of gas-liquid two-phase flow patterns in a riser based on recursive characteristics and CNN

Related Author

WANG Xiaodong

HUI Hu

KUANG Yiwu

ZHUAN Rui

WANG Wen

ZHU Juxiang

Related Institution

Key Laboratory of Pressure Systems and Safety, Ministry of Education, East China University of Science and Technology

Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University

Institute of Chemical Engineering, Zhejiang University of Technology

⁰