Minimal coke consumption calculating method

MA Junjie; WU Min; LI Yong

doi:10.3969/j.issn.0438-1157.2012.09.003

您当前的位置：

首页 >

文章列表页 >

Minimal coke consumption calculating method

更新时间：2025-12-10

- Minimal coke consumption calculating method
- CIESC Journal Issue 9, Pages: 2688-2696(2012)
- 作者机构：
  
  1. 中南大学信息科学与工程学院,湖南,长沙,410083
  2. 先进控制与智能自动化湖南省工程实验室,湖南,长沙,410083
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2012.09.003
  CLC： F046
- Online First：05 September 2012，
  
  Published：05 September 2012
- 稿件说明：
移动端阅览
MA Junjie, WU Min, LI Yong. Minimal coke consumption calculating method[J]. CIESC Journal, 2012, (9): 2688-2696.
DOI：

MA Junjie, WU Min, LI Yong. Minimal coke consumption calculating method[J]. CIESC Journal, 2012, (9): 2688-2696. DOI： 10.3969/j.issn.0438-1157.2012.09.003.

摘要

提出了一种烧结过程焦粉最低配比计算方法。首先针对不同烧结终点位置、料层厚度的料层等温线数据建立烧结料层侧面温度场BP神经网络(back propagation neural network

BPNN)模型;然后采用最小二乘支持向量机(least squares support vector machine

LS-SVM)算法建立烧结终点位置、料层厚度等烧结过程状态变量与料层蓄热所需能量之间的关系模型;通过对烧结过程中主要物理、化学反应的分析

计算得到了水分蒸发与碳酸盐分解过程需要热量;最后通过对碳转换形式进行分析

计算得到烧结配料过程焦粉最低配比。仿真实验和工业实际数值算例表明

提出的焦粉最低配比计算方法能有效地反映实际生产所需的最低焦粉配比

从而为烧结过程节能减排提供重要的数值依据。

Abstract

In actual sintering process

ratios of coal are widely determined by experience.Meanwhile

the consumption models of coal built from many sintering experiments and statistics are too complicated to apply in sintering process.This paper proposed a minimal coke consumption calculating method.Firstly

a BPNN temperature field model of different BTP(burning through point)and thickness is worked out according to isotherm data from actual sintering process.Secondly

the samples of the relationship between BTP

thickness and energy consumption for temperature rising are found and LS-SVM algorithm is applied to build the model due to these characteristics.The energy consumptions of carbonate decomposition and water evaporation are calculated by analyses of physical and chemical changes.Finally

the minimal coke consumption is worked out by coke combustion release process analysis.The simulation and actual sintering data show that the result of this paper reflects the actual need of minimal coke consumption in sintering process and this calculating method can guide the actual production process.

关键词

Keywords

references

Views

456

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on the influence of different localized large heat flow positions on self-pressurization process of liquid hydrogen tank for vehicles

Numerical simulation of effect of phase change material on temperature distribution in power battery pack of vehicle

Numerical simulation of effect of heat pipe cooling device on temperature distribution in lithium-ion battery pack of vehicle

Effect of humidifying amount on defrosting of air cooler in low-temperature cold storage

Three-dimensional simulation of solidification and heat transfer for air-cooling molten blast furnace slag droplet

Related Author

ZHU Yuhao

XIE Fushou

GAO Wanli

BU Yu

LIU Ruimin

LI Yanzhong

MA Chongfang

YE Fang

Related Institution

Institute of Refrigeration and Cryogenic Engineering, Xi’an Jiaotong University

Beijing Institute of Aerospace Testing Technology

Jiangsu Key Laboratory of Cryogenic Technology and Application, CSSC Pride (Nanjing) Cryogenic Technology Co., Ltd.

MOE Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Beijing Key Laboratory of Heat Transfer and Energy Conversion, College of Environmental and Energy Engineering, Beijing University of Technology

Collaborative Innovation Center of Electric Vehicles in Beijing

⁰