Effects of solid particles on experimental concentration factor of seawater desalination and film heat transfer coefficient in fluidized bed with multi-phase evaporation

弓凯雷1; 2; 王德武1; 刘燕2; 张少峰2

doi:10.3969/j.issn.0438-1157.2012.08.008

您当前的位置：

首页 >

文章列表页 >

Effects of solid particles on experimental concentration factor of seawater desalination and film heat transfer coefficient in fluidized bed with multi-phase evaporation

更新时间：2025-12-10

- Effects of solid particles on experimental concentration factor of seawater desalination and film heat transfer coefficient in fluidized bed with multi-phase evaporation
- CIESC Journal Issue 8, Pages: 2392-2397(2012)
- 作者机构：
  
  1河北工业大学化工学院,天津
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2012.08.008
  CLC：
- Online First：05 August 2012，
  
  Published：05 August 2012
- 稿件说明：
移动端阅览
弓凯雷1, 2, 王德武1, et al. Effects of solid particles on experimental concentration factor of seawater desalination and film heat transfer coefficient in fluidized bed with multi-phase evaporation[J]. CIESC Journal, 2012, (8): 2392-2397.
DOI：

弓凯雷1, 2, 王德武1, et al. Effects of solid particles on experimental concentration factor of seawater desalination and film heat transfer coefficient in fluidized bed with multi-phase evaporation[J]. CIESC Journal, 2012, (8): 2392-2397. DOI： 10.3969/j.issn.0438-1157.2012.08.008.

摘要

提高海水淡化操作浓缩比，不仅可以提高造水比，还可以有效降低淡化后浓海水再利用的后处理成本，故其是实现低成本零排放的关键之一。在一套循环流化床多相蒸发海水淡化实验装置上，分别采用汽-液两相及汽-液-固三相操作，考察固体颗粒对海水淡化操作浓缩比及膜传热系数的影响，并分析垢层的主要成分。实验表明：高温下CaSO4首先析出，是形成垢层的主要成分；采取汽-液两相操作，膜传热系数保持在1.75 kW·m-2·K-1左右，操作浓缩比可达到3.8左右；采取汽-液-固三相操作，固体颗粒强化传热和防除垢的作用显著，加入颗粒体积分数为4%时，在膜传热系数保持在2.3 kW·m-2·K-1左右不降低的情况下，海水淡化操作浓缩比达到5.8以上。

Abstract

Increasing seawater desalination concentration factor can improve the performance ratio and effectively reduce the post-treatment cost of the concentrated seawater that is reused，therefore，it is one of the keys to realizing low-cost zero discharge of seawater desalination.The experiment was carried out in a multi-phase circulating fluidization bed(CFB)evaporator.It aimed to study the effects of particle volume fraction on seawater desalination concentration factor and film heat transfer coefficient.The main components of the scaling were also analyzed.The operations of vapor-liquid two-phase boiling flow and vapor-liquid-solid three-phase boiling flow were investigated in the experiment.The results showed that calcium sulfate is the main component of the scaling，and it was firstly separated out in the seawater desalination experiment.In the vapor-liquid two-phase boiling flow，the film heat transfer coefficient was kept at 1.75 kW·m-2·K-1 and concentration factor reached 3.8.In the vapor-liquid-solid three-phase boiling flow，the result revealed that solid particles remarkably enhanced heat transfer and improved the prevention and removal of fouling.When particle volume fraction was 4% and film heat transfer coefficient was kept at 2.3 kW·m-2·K-1，seawater desalination concentration factor reached more than 5.8.

关键词

Keywords

references

Views

316

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Characterization and modeling of limestone calcination and sulfation in oxy-fuel combustion atmosphere

Analysis of flow field characteristics and mixing performance of different SK-type static mixers

Thermal analysis of phase change suspension jet impinging on wall surface covered with variable-shape porous layer

Progress in research of selective oxidation of low carbon polyols over nano-Au catalysts with precise electronic effect regulation

Research progress of ionic liquids in separation of aromatics/alkanes and olefins/alkanes

Related Author

WANG Chunbo

ZHANG Bin

CHEN Liang

GUO Taicheng

Related Institution

School of Energy Power and Mechanical Engineering, North China Electric Power University

⁰