Preparation and permeability of ambient crosslinking polyacrylate latex film

林美娜

doi:10.3969/j.issn.0438-1157.2012.07.042

您当前的位置：

首页 >

文章列表页 >

Preparation and permeability of ambient crosslinking polyacrylate latex film

更新时间：2025-12-10

- Preparation and permeability of ambient crosslinking polyacrylate latex film
- CIESC Journal Issue 7, Pages: 2279-2284(2012)
- 作者机构：
  
  福州大学化学化工学院
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2012.07.042
  CLC： Q337;TQ028
- Online First：05 July 2012，
  
  Published：05 July 2012
- 稿件说明：
移动端阅览
林美娜. Preparation and permeability of ambient crosslinking polyacrylate latex film[J]. CIESC Journal, 2012, (7): 2279-2284.
DOI：

林美娜. Preparation and permeability of ambient crosslinking polyacrylate latex film[J]. CIESC Journal, 2012, (7): 2279-2284. DOI： 10.3969/j.issn.0438-1157.2012.07.042.

摘要

以双丙酮丙烯酰胺（DAAM）为官能性单体合成了带酮羰基的聚丙烯酸酯核壳乳液，将其与己二酸二酰肼（ADH）在室温下交联制备了聚丙烯酸酯多孔乳胶膜，考察了乳液壳层组成、ADH用量、致孔剂用量及种类对乳胶膜渗透性能的影响。研究结果表明，当壳层组成BA/(MMA+AA+DAAM)质量比为2.5/2.5时，乳胶粒子没有完全变形，粒子间相互融接堆积，结合致孔剂的作用，形成了内部呈疏松多孔结构的乳胶膜，膜的渗透量较高；研究进一步揭示，限制大分子链段的热运动有利于维持乳胶膜的多孔结构，从而获得较高的渗透量；此外，发现以葡萄糖、聚乙二醇300（PEG300）为致孔剂时可使乳胶膜获得较高的渗透量。

Abstract

Taking adipic acid dihydrazide (ADH)as cross-linker

a porous polyacrylate latex film was formed at ambient temperature from polyacrylate core-shell emulsion incorporated with diacetone acrylamide (DAAM).The effects of shell composition of core-shell emulsion

ADH content

porogen content and porogen type on the permeability of latex film were investigated.The results showed that the latex particles with BA/(MMA+AA+DAAM)=2.5/2.5（mass ratio） in shell composition could not fuse completely into a continuous dense film

but formed granular deposits.Then

a loose and porous latex film with high permeability was formed with the help of porogen.The investigation further revealed that the restricted movement of polymer chains contributed to the maintenance of porous structure in the latex film and then high permeability.In addition

the study indicated that the latex films with high permeability were formed with glucose or polyethylene glycol (PEG300)as porogen.

关键词

Keywords

references

Views

474

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Progress in molecular structure design for polyimide membrane materials to enhance CO2 permeation ability

Research progress of membrane separation materials for different industrial CO2-containing mixtures

Dispersion of pigment particles in polyacrylate latex film containing phthalocyanine blue

Advantages and risks of swirling cooling granulation towers

Progress of solar photo-thermo-catalysis for ammonia synthesis and decomposition under mild conditions

Related Author

RUAN Xuehua

HE Gaohong

LUO Haizhong

LUO Zhibin

ZHANG Zijia

QIU Xinyue

SUN Xiang

WANG Jiaming

Related Institution

School of Chemical Engineering at Panjin, Dalian University of Technology

Guangdong Electric Power Design Institute Co., Ltd., China Energy Engineering Group

School of Chemical Engineering, Dalian University of Technology, Panjin Campus

Engineering Research Center of Ecological Dyeing and Finishing Technology, Key Laboratory of Advanced Textile Materials and Manufacturing Technology, Ministry of Education, Zhejiang Sci-Tech University

Zhejiang Huatai Silk Co., Ltd.

⁰