Charge performance of packed bed thermal storage unit with phase change material having different melting points

YANG Lei; ZHANG Xiaosong

doi:10.3969/j.issn.0438-1157.2012.04.006

您当前的位置：

首页 >

文章列表页 >

Charge performance of packed bed thermal storage unit with phase change material having different melting points

更新时间：2025-12-10

- Charge performance of packed bed thermal storage unit with phase change material having different melting points
- CIESC Journal Issue 4, Pages: 1032-1037(2012)
- 作者机构：
  
  东南大学能源与环境学院,江苏,南京
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2012.04.006
  CLC： K512
- Online First：05 April 2012，
  
  Published：05 April 2012
- 稿件说明：
移动端阅览
YANG Lei, ZHANG Xiaosong. Charge performance of packed bed thermal storage unit with phase change material having different melting points[J]. CIESC Journal, 2012, (4): 1032-1037.
DOI：

YANG Lei, ZHANG Xiaosong. Charge performance of packed bed thermal storage unit with phase change material having different melting points[J]. CIESC Journal, 2012, (4): 1032-1037. DOI： 10.3969/j.issn.0438-1157.2012.04.006.

摘要

对采用多种不同熔点相变材料（PCM）构成的堆积蓄热床进行了数值分析。热水作为换热流体（HTF）自上而下流经蓄热床，熔化相变材料、蓄积相变潜热。石蜡作为相变材料被注射入聚碳酸酯球壳内形成相变胶囊，根据熔点高低依次排放在蓄热床的不同位置，熔点越高距离热水进口越近。假定流场稳定，采用一维Schumann模型计算HTF温度，相变模拟采用显热容法。分别对两种排列方式下采用2种、3种以及4种相变材料的蓄热床的蓄热过程进行了基于热力学第一及第二定律的性能分析，并将结果与单相变材料蓄热床进行比较。基于热力学第一定律分析结果表明，采用多种相变材料构成的蓄热堆积床蓄热速度更快，能量效率更高。基于热力学第二定律分析表明，平均熔点更高的蓄热床能够储存更高的火用。结果表明采用多熔点相变材料构成的堆积蓄热床能够显著地缩短蓄热时间，改进蓄热性能。

Abstract

A numerical study on a packed bed thermal storage unit with phase change material（PCM)having different melting points is presented.Paraffin is used as PCM and injected into polycarbonate spheres as phase change capsules.Hot water is used as heat transfer fluid（HTF)flowing from the top down to melt PCM and store latent heat.The capsules are placed in series in the tank based on melting points.PCM having higher melting temperature is placed closer with hot water inlet.One-dimensional Schumann’s model with steady-state flow field assumption is adopted to calculate HTF temperature

while the phase change of PCM is simulated using apparent heat capacity method.The energy and exergy performance in charging process of two arrangement modes containing two

three and four kinds different PCMs are investigated and compared with those of packed bed using only one kind of PCM.The energy comparison results indicate that the thermal storage unit with multiple PCMs has much higher charge rate and higher thermal efficiency than single PCM storage bed.In the exergy comparison

the storage bed with higher average melting point can store more exergy than that has lower average melting point.The utilization of multiple PCMs can dramatically reduce charge time

improving the storage performance.

关键词

Keywords

references

Views

402

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Energy-economic-environmental analysis of coal-to-urea considering green power-hydrogen-heat substitution

POD analysis of flow field in horizontal two-group nozzle impinging stream reactor

Influence of aluminum particle size on energy output characteristics and thermal stability of emulsion explosive

Study on synergistic modification of nitrogen-doped carbon coating and Ti⁴⁺ co-doping for lithium vanadium phosphate cathode materials

Effect of belt structure design on the vulcanization characteristics of all-steel radial tires

Related Author

LIU Yongzhong

KANG Lixia

WU Le

WANG Shuai

DUAN Ruiyang

ZHANG Jianwei

MA Fanrong

ZHANG Zhigang

Related Institution

Department of Chemical Engineering, Xi’an Jiaotong University

China Coal Energy Research Institute Company Limited

Department of Chemical Engineering, Northwest University

School of Energy and Power Engineering, Shenyang University of Chemical Technology

School of Civil Engineering, Anhui University of Science and Technology,.

⁰