Acidic ionic liquid-catalyzed synthesis of 1,3-diphenyl urea from aniline and carbon dioxide

姚素杰

doi:10.3969/j.issn.0438-1157.2012.03.020

您当前的位置：

首页 >

文章列表页 >

Acidic ionic liquid-catalyzed synthesis of 1,3-diphenyl urea from aniline and carbon dioxide

更新时间：2025-12-10

- Acidic ionic liquid-catalyzed synthesis of 1,3-diphenyl urea from aniline and carbon dioxide
- CIESC Journal Issue 3, Pages: 812-818(2012)
- 作者机构：
  
  河北工业大学绿色化工与高效节能河北省重点实验室
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2012.03.020
  CLC： Q246.3
- Online First：05 March 2012，
  
  Published：05 March 2012
- 稿件说明：
移动端阅览
姚素杰. Acidic ionic liquid-catalyzed synthesis of 1,3-diphenyl urea from aniline and carbon dioxide[J]. CIESC Journal, 2012, (3): 812-818.
DOI：

姚素杰. Acidic ionic liquid-catalyzed synthesis of 1,3-diphenyl urea from aniline and carbon dioxide[J]. CIESC Journal, 2012, (3): 812-818. DOI： 10.3969/j.issn.0438-1157.2012.03.020.

摘要

以苯胺和二氧化碳为原料催化合成二苯基脲是一条绿色工艺路线，重点对Lewis酸类离子液体催化该反应性能进行了研究。考察了一系列碱性和Lewis酸性催化剂的催化性能，以及溶剂对该反应的影响

结果表明

以无水AlCl3为催化剂和乙腈为溶剂组成的反应体系效果较好。以氯铝酸类离子液体为催化剂兼溶剂，考察了离子液体阴阳离子、CO2初始压力、反应时间、反应温度以及催化剂用量等因素对二苯基脲合成反应的影响。结果表明

以［Bmim］Cl-AlCl3离子液体为催化剂兼溶剂，在CO2初始压力为1 MPa、反应时间为7 h、反应温度为160℃、AlCl3/苯胺质量比为1∶1的条件下，苯胺的转化率、二苯基脲的收率及选择性分别为18.1%、17.9%和98.9%。此外，提出了［Bmim］Cl-AlCl3离子液体催化苯胺和二氧化碳的反应机理。

Abstract

A novel green process for the synthesis of 1

3-diphenyl urea(DPU) by reaction of aniline with carbon dioxide was studied，and the emphasis was put on the investigation of the catalytic performance of Lewis acidic ionic liquids. Firstly

the effects of a series of alkaline or Lewis acid catalysts and solvents on the synthesis of DPU were investigated

and it was found that AlCl3/acetonitrile system showed excellent catalytic performance. Then the influence of the kind of cation and anion in ionic liquids

initial pressure of CO2

reaction time

reaction temperature

and catalyst dosage was discussed in the presence of chloroaluminate ionic liquids as both Lewis acid catalyst and solvent. Under the reaction conditions of ［Bmim］Cl-AlCl3 as both the catalyst and solvent

initial pressure of CO2 of 1 MPa

reaction time of 7 h

reaction temperature of 160℃

and mass ratio of AlCl3 to aniline of 1∶1

the conversion of aniline was 18.1%

and the yield and selectivity to DPU were 17.9% and 98.9%

respectively. Additionally

a plausible catalytic reaction mechanism was also proposed.

关键词

Keywords

references

Views

484

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

A density functional theory study on the sensing of dissolved gases CO and CO2 in transformer oil using boron-doped nitrogen-based graphene

Preparation of core-shell nanomaterials and their application in thermocatalytic hydrogenation of CO/CO2

Synthesis of oxygen-rich functionalized hypercrosslinked resin and its adsorption of aniline

Preparation of N2 selective ZIF-8 composite membrane for CO2 capture

Selection of cubic equations of state for separation of CO2-C2H6 azeotrope

Related Author

CAI Tianzi

ZHANG Haifeng

LIN Haidan

ZHANG Zilong

ZHOU Pengyu

WANG Bolin

LI Xiaonian

JIN Ke

Related Institution

School of Chemical Engineering, Northeast Electric Power University

State Grid Jilin Electric Power Research Institute Co., Ltd.

Industrial Catalysis Institute, Zhejiang University of Technology

Guangzhou Institute of Energy Conversion, CAS Key Laboratory of Renewable Energy

Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University

⁰