Departure-site spacing for liquid columns falling between horizontal circular tubes

吕凯

doi:10.3969/j.issn.0438-1157.2012.03.010

您当前的位置：

首页 >

文章列表页 >

Departure-site spacing for liquid columns falling between horizontal circular tubes

更新时间：2025-12-10

- Departure-site spacing for liquid columns falling between horizontal circular tubes
- CIESC Journal Issue 3, Pages: 740-745(2012)
- 作者机构：
  
  西安交通大学热流科学与工程教育部重点实验室
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2012.03.010
  CLC： K172
- Online First：05 March 2012，
  
  Published：05 March 2012
- 稿件说明：
移动端阅览
吕凯. Departure-site spacing for liquid columns falling between horizontal circular tubes[J]. CIESC Journal, 2012, (3): 740-745.
DOI：

吕凯. Departure-site spacing for liquid columns falling between horizontal circular tubes[J]. CIESC Journal, 2012, (3): 740-745. DOI： 10.3969/j.issn.0438-1157.2012.03.010.

摘要

采用可视化方法对水、乙二醇、水/乙二醇混合物在8种液体分布装置开孔规格下的管间相邻液柱分离间距进行了实验测量，得到了分离间距随流量、管间距、管外表面结构和开孔规格的变化规律。随着Reynolds数增加，分离间距呈减小趋势；随着管间距增大，分离间距先增大后趋于稳定值。管外表面结构和工质热物性共同影响分离间距。在开孔孔径一定的条件下，开孔间距逐步增大，分离间距随之增大；在孔间距一定的条件下，开孔孔径逐步增大，分离间距随之减小。

Abstract

The departure-site spacing between liquid columns was measured for water

ethylene glycol

water and ethylene glycol binary mixture with volume fraction 0.5/0.5 on eight different orifice configurations with a visualization method. The influences of flow rate

tube spacing

surface structure and orifice configuration on departure-site spacing were investigated for the subcooled liquid columns flowing between horizontal tubes at the ambient temperature and normal pressure. Under the conditions of this study

the departure-site spacing increases with the decrease of Re for high-Ga flow. For a fixed Re

the departure-site spacing increases with the increase of tube spacing. The surface structure and thermo-physical properties of fluid influence the departure-site spacing. Bigger hole diameter brings smaller departure-site spacing at a fixed distance between adjacent holes

while larger distance between adjacent holes leads to larger departure-site spacing at a fixed hole diameter.The departure-site spacing between liquid columns was measured for water

ethylene glycol

water and ethylene glycol binary mixture with volume fraction 0.5/0.5 on eight different orifice configurations with a visualization method. The influences of flow rate

tube spacing

the departure-site spacing increases with the decrease of Re for high-Ga flow. For a fixed Re

while larger distance between adjacent holes leads to larger departure-site spacing at a fixed hole diameter.

关键词

Keywords

references

Views

345

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Surface structure and activity of iron molybdate catalyst for methanol oxidation to formaldehyde

Thermodynamic study of germanium-impurity competitive deposition in GeCl4-MxCly-H2 system

Performance of alkali metal-loaded SrMnO3 oxygen carriers in chemical looping oxidative dehydrogenation of ethylbenzene

Study on performance enhancement and cold retention characteristics of solid packed bed cold energy storage

Study on entropy wave production and dissipation in partially premixed swirl flames subject to inlet perturbations

Related Author

ZHANG Shuai

ZHANG Yike

HU Rlckt

ZHEN Bin

HAN Minghan

Related Institution

Department of Chemical Engineering, Tsinghua University

College of Chemistry and Chemical Engineering, Tianjin University of Technology

⁰