Heat transfer characteristics of honeycomb liquid-cooled power battery module

FENG Nenglian; MA Ruijin; CHEN Longke; DONG Shikang; WANG Xiaofeng; ZHANG Xingyu

doi:10.11949/j.issn.0438-1157.20181269

您当前的位置：

首页 >

文章列表页 >

Heat transfer characteristics of honeycomb liquid-cooled power battery module

Fluid dynamics and transport phenomena | 更新时间：2026-07-24

- Heat transfer characteristics of honeycomb liquid-cooled power battery module
- CIESC Journal Vol. 70, Issue 5, Pages: 1713-1722(2019)
- 作者机构：
  
  1.北京工业大学环境与能源工程学院，北京 100124
  2.上海奔悦人工智能科技有限责任公司，上海 200233
  3.新能科技香港有限公司，中国香港
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20181269
  CLC： TQ 028.8
- Received：29 October 2018，
  
  Revised：2019-01-25，
  
  Online First：24 July 2026，
  
  Published：05 May 2019
- 稿件说明：
移动端阅览
冯能莲, 马瑞锦, 陈龙科, 董士康, 王小凤, 张星宇. 新型蜂巢式液冷动力电池模块传热特性研究[J]. 化工学报, 2019, 70(5): 1713-1722

FENG Nenglian, MA Ruijin, CHEN Longke, DONG Shikang, WANG Xiaofeng, ZHANG Xingyu. Heat transfer characteristics of honeycomb liquid-cooled power battery module[J]. CIESC Journal, 2019, 70(5): 1713-1722
冯能莲, 马瑞锦, 陈龙科, 董士康, 王小凤, 张星宇. 新型蜂巢式液冷动力电池模块传热特性研究[J]. 化工学报, 2019, 70(5): 1713-1722 DOI： 10.11949/j.issn.0438-1157.20181269.

FENG Nenglian, MA Ruijin, CHEN Longke, DONG Shikang, WANG Xiaofeng, ZHANG Xingyu. Heat transfer characteristics of honeycomb liquid-cooled power battery module[J]. CIESC Journal, 2019, 70(5): 1713-1722 DOI： 10.11949/j.issn.0438-1157.20181269.

摘要

为了维持动力电池的性能、延长其使用寿命，应使电池模块工作过程中的温度和温差维持在适宜的范围之内。为此，提出一种新型蜂巢式液冷动力电池模块，该结构内部设有进/出口导流板且电池呈蜂巢式分布，冷却液体与电池呈360°间接接触，极大强化了换热效果。在单体电池热特性数值模拟与试验验证的基础上，通过计算流体力学平台建立新型蜂巢式液冷电池模块模型，研究了电池模块的热行为，分析了冷却液流量、冷却液温度对电池模块传热性能的影响。结果表明：（1）增加冷却液流量可显著降低电池模块最高温度，改善温度均匀性，当冷却液流量增加到1.5 L/min之后，电池模块最高温度及最大温差趋于稳定；（2）冷却液温度的降低可显著降低电池模块中最高温度，但在一定程度上恶化了模块中的温度均匀性；（3）冷却液流量和温度对电池模块的加热特性影响显著。因此，采用液冷方式是必要的。

Abstract

To maintain the performance of the power battery and prolong its service life

the temperature and temperature difference during the operation of the battery module should be maintained within an appropriate range. Thus

a new type of honeycomb liquid-cooled power battery module is proposed. The structure has an inlet/outlet guide plate inside and the battery is honeycomb-like distribution. The cooling liquid contacts with the battery indirectly at 360°

which greatly strengthens the heat transfer effect. On the basis of the numerical simulation and experimental validation of the thermal characteristics of single battery

a new model of honeycomb liquid-cooled battery module was established by computational fluid dynamics(CFD) platform

the thermal behavior of the battery module was studied

and the effects of the coolant flow rate

the coolant temperature of battery on the heat dissipation performance of the battery module were studied. The results show that: (1) Increasing the flow rate of coolant can significantly reduce the maximum temperature of the battery module and improve the temperature uniformity

when the flow rate of coolant increases to 1.5 L/min

the maximum temperature and the maximum temperature difference of the battery module tend to be stable; (2) Decreasing the temperature of coolant can significantly reduce the highest temperature of the battery module

but to a certain extent

the temperature uniformity in the battery module is deteriorated; (3) The coolant flow rate and the coolant temperature have significant influence on the heating characteristics of the battery module. Therefore

liquid cooling is necessary.

关键词

Keywords

references

Greco A , Jiang X , Cao D P . An investigation of lithium-ion battery thermal management using parafﬁn/porous-graphite-matrix composite [J ] . Journal of Power Sources , 2015 , 278 : 50 - 68 .

Ling Z Y , Zhang Z G , Shi G Q , et al . Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules [J ] . Renew. Sustain. Energy Rev ., 2014 , 31 : 427 - 438 .

Zhao J T , Rao Z H , Huo Y T , et al . Thermal management of cylindrical power battery module for extending the life of new energy electric vehicles [J ] . Appl. Therm. Eng ., 2015 , 85 : 33 - 43 .

Malik M , Dincer I , Rosen M A . Review on use of phase change materials in battery thermal management for electric and hybrid electric vehicles [J ] . Int . J . Energy Res ., 2016 , 40 ( 8 ): 1011 - 1031 .

Chacko S , Chung Y M . Thermal modeling of Li-ion polymer battery for electric vehicle drive cycles [J ] . Journal of Power Sources , 2012 , 213 ( 9 ): 296 - 303 .

Liu R , Chen J X , Xun J Z , et al . Numerical investigation of thermal behaviors in lithium-ion battery stack discharge [J ] . Appl. Energy , 2014 , 132 : 288 - 97 .

Manzetti S , Mariasiu F . Electric vehicle battery technologies: from present state to future systems [J ] . Renew. Sustain. Energy Rev ., 2015 , 51 : 1004 - 1012 .

Shah K , Chalise D , Jain A . Experimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells [J ] . Journal of Power Sources , 2016 , 330 : 167 - 174 .

Wilke S , Schweitzer B , Khateeb S , et al . Preventing thermal runaway propagation in lithium ion battery packs using a phase change composite material: an experimental study [J ] . Journal of Power Sources , 2017 , 340 : 51 - 59 .

Wang H , Lara-Curzio E , Rule E T , et al . Winchester, mechanical abuse simulation and thermal runaway risks of large-format Li-ion batteries [J ] . Journal of Power Sources , 2017 , 342 : 913 - 920 .

Pesaran A A . Battery thermal management in EVs and HEVs: issues and solutions [C ] //Advanced Automotive Battery Conference. Nevada , 2001 .

Klein M , Tong S , Park J W . In-plane nonuniform temperature effects on the performance of a large-format lithium-ion pouch cell [J ] . Appl. Energy , 2016 , 165 : 639 - 647 .

Zhao C R , Cao W J , Dong T , et al . Thermal behavior study of discharging/charging cylindrical lithium-ion battery module cooled by channeled liquid flow [J ] . International Journal of Heat and Mass Transfer , 2018 , 120 : 751 - 762 .

Liu Z , Wang Y , Zhang J , et al . Shortcut computation for the thermal management of a large air-cooled battery pack [J ] . Appl. Therm. Eng ., 2014 , 66 : 445 - 452 .

Xu X M , He R . Review on the heat dissipation performance of battery pack with different structures and operation conditions [J ] . Renew. Sustain. Energy Rev ., 2014 , 29 : 301 - 315 .

Yu K , Yang X , Cheng Y , et al . Thermal analysis and two-directional air ﬂow thermal management for lithium-ion battery pack [J ] . Journal of Power Sources , 2014 , 270 : 193 - 200 .

Chen D F , Jiang J C , Kim G H , et al . Comparison of different cooling methods for lithium ion battery cells [J ] . Appl. Therm. Eng ., 2016 , 94 : 846 - 854 .

Rao Z H , Wang S F , Zhang Y L . Thermal management with phase change material for a power battery under cold temperatures [J ] . Energy Sources, Part A: Recovery, Utilization, and Environmental Effects , 2014 , 36 ( 20 ): 2287 - 2295 .

Duan X , Naterer G F . Heat transfer in phase change materials for thermal management of electric vehicle battery modules [J ] . International Journal of Heat and Mass Transfer , 2010 , 53 ( 23 / 24 ): 5176 - 5182 .

Javani N , Dincer I , Naterer G F , et al . Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles [J ] . Int . J . Heat Mass Transf ., 2014 , 72 : 690 - 703 .

Lin C J , Xu S C , Chang G F , et al . Experiment and simulation of a LiFePO 4 battery pack with a passive thermal management system using composite phase change material and graphite sheets [J ] . Journal of Power Sources , 2015 , 275 : 742 - 749 .

Nelson P , Dees D , Amine K , et al . Modeling thermal management of lithium-ion PNGV batteries [J ] . Journal of Power Sources , 2002 , 110 ( 2 ): 349 - 356 .

Zhang T S , Gao C , Gao Q , et al . Status and development of electric vehicle integrated thermal management from BTM to HVAC [J ] . Appl. Therm. Eng ., 2015 , 88 : 398 - 409 .

Chen D , Jiang J , Kim G H , et al . Comparison of different cooling methods for lithium ion battery cells [J ] . Appl. Therm. Eng ., 2016 , 94 : 846 - 854 .

Yuan H , Wang L F . Battery thermal management system with liquid cooling and heating in electric vehicles [J ] . J. Automotive Safety and Energy , 2012 , 3 ( 4 ): 371 - 380 .

Liu R , Chen J X , Xun J Z , et al . Numerical investigation of thermal behaviors in lithium-ion battery stack discharge [J ] . Applied Energy , 2014 , 132 : 288 - 297 .

Jarrett A , Kim I Y . Influence of operating conditions on the optimum design of electric vehicle battery cooling plates [J ] . Journal of Power Sources , 2014 , 245 : 644 - 655 .

Adams D , Berdichevsky E , Colson T , et al . Battery pack thermal management system: US2009/0023056A1 [P ] . 2009-01-22 .

安徽新能科技有限公司 . 一种用于新能源电动汽车中冷却箱的焊接: 106181082A [P ] . 2016-07-10 .

Anhui Xinen Technology Company . A welding method for cooling box of new energy electric vehicle: 106181082A [P ] . 2016-07-10 .

Nishi Y . Lithium ion batteries: past 10 years and the future [J ] . Journal of Power Sources , 2001 , 100 : 101 - 106 .

Chen S C , Wan C C , Wang Y Y . Thermal analysis of lithium-ion batteries [J ] . Journal of Power Sources , 2005 , 140 : 111 - 124 .

Saw L H , Ye Y H , Tay A A O . Electrochemical–thermal analysis of 18650 lithium iron phosphate cell [J ] . Energy Convers. Manage ., 2013 , 75 : 162 - 174 .

Emre G , Özgür E , Murat K . 3-D CFD modeling and experimental testing of thermal behavior of a Li-ion battery [J ] . Applied Thermal Engineering , 2017 , 120 : 484 - 495 .

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental and large eddy simulation study on gasoline-air mixture explosions in semi-confined pipe with 90° right-angle bend

Characteristics of ash deposition on a novel heat transfer surface

Characteristics of outdoor air dehumidifier combined with heat pump system and solid desiccant plates

Numerical simulation of gas production from hydrate by depressurization combined with well-wall heating

Experiment and simulation of PSA process for small oxygen generator with two adsorption beds

Related Author

LI Meng

DU Yang

LI Guoqing

WANG Shimao

LIU Chong

WEI Shihao

LI Jinbo

WANG Peili

Related Institution

Army Logistics University of PLA

Unit 63926

Center of Thermal Science and Technology, Shandong University, Ji'nan

School of Mechanical Engineering, University of Science and Technology Beijing

Guangzhou Research Center for Gas Hydrate, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences

⁰