Performance of solar steam ejector refrigerator

YU Chaoqun; ZANG Runqing; DUAN Zhenkun

doi:10.11949/j.issn.0438-1157.20181123

您当前的位置：

首页 >

文章列表页 >

Performance of solar steam ejector refrigerator

更新时间：2025-12-10

- Performance of solar steam ejector refrigerator
- CIESC Journal Issue S2, Pages: 205-209(2018)
- 作者机构：
  
  天津商业大学, 天津市制冷技术重点实验室, 冷冻冷藏技术教育部工程研究中心, 天津市制冷技术工程中心,天津,300134
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20181123
  CLC： K72.9
- Online First：31 December 2018，
  
  Published：31 December 2018
- 稿件说明：
移动端阅览
YU Chaoqun, ZANG Runqing, DUAN Zhenkun. Performance of solar steam ejector refrigerator[J]. CIESC Journal, 2018, (S2): 205-209.
DOI：

YU Chaoqun, ZANG Runqing, DUAN Zhenkun. Performance of solar steam ejector refrigerator[J]. CIESC Journal, 2018, (S2): 205-209. DOI： 10.11949/j.issn.0438-1157.20181123.

摘要

基于对太阳能蒸汽喷射式制冷体统性能的研究，实验以R134a为制冷剂，采用控制变量法，研究了蒸发温度和发生温度对制冷系统的喷射系数、制冷量和COP的影响。结果表明：当冷凝温度和发生温度不变时，喷射系数、制冷量和COP随着蒸发温度的上升而增加。当冷凝温度为35℃、蒸发温度为6℃时，发生温度低于66℃，喷射系数、制冷量和COP都为0；当发生温度大于66℃时，喷射系数、制冷量和COP随着发生温度的上升先增加后减小，当发生温度为84℃时达到最大值，分别为0.223、2.02 kW、0.204。

Abstract

Based on the study of the performance for the solar steam jet refrigeration system

the experiment takes R134a as the refrigerant and uses the control variable method to study the influence of the evaporation temperature and generator temperature on the ejection coefficient

the cooling capacity and the COP of the refrigeration system. The results show that:when the condensing temperature and generator temperature are constant

the injection coefficient

refrigerating capacity and COP increase with the increase of evaporation temperature. When the condensing temperature is 35℃ and the evaporation temperature is 6℃

the generator temperature is below 66℃

and the injection coefficient

refrigerating capacity and COP are 0. When the generator temperature is more than 66℃

the injection coefficient

refrigerating capacity and COP increase first and then decrease with the increase of temperature. When the generator temperature is 84℃

the maximum values are 0.223

2.02 kW and 0.204 respectively.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Hydrolysis reaction mechanism of CNCl on the surface of composite metal CuCr2O4

Recent advances in machine learning for modeling and control of crystallization processes

Mechanism and regulation of supercooling behavior in imidazolium-based ionic liquids

Oxygen mass transfer performance of hollow fiber non-bubble aeration membrane based on gas/liquid-phase measurement method

Study on flash evaporation characteristics as well as thermodynamic variation performance in liquid hydrogen tank during on-orbit venting

Related Author

No data

Related Institution

No data

⁰