Nitrogen expansion liquefaction and separation process for natural gas with high ethane content

HE Ting; LIN Wensheng

doi:10.11949/j.issn.0438-1157.20181119

您当前的位置：

首页 >

文章列表页 >

Nitrogen expansion liquefaction and separation process for natural gas with high ethane content

更新时间：2025-12-10

- Nitrogen expansion liquefaction and separation process for natural gas with high ethane content
- CIESC Journal Issue S2, Pages: 226-231(2018)
- 作者机构：
  
  上海交通大学制冷与低温工程研究所,上海,200240
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20181119
  CLC： Q519
- Online First：31 December 2018，
  
  Published：31 December 2018
- 稿件说明：
移动端阅览
HE Ting, LIN Wensheng. Nitrogen expansion liquefaction and separation process for natural gas with high ethane content[J]. CIESC Journal, 2018, (S2): 226-231.
DOI：

HE Ting, LIN Wensheng. Nitrogen expansion liquefaction and separation process for natural gas with high ethane content[J]. CIESC Journal, 2018, (S2): 226-231. DOI： 10.11949/j.issn.0438-1157.20181119.

摘要

在液化页岩气的同时分离制取液化乙烷是一种经济合理的选择。采用HYSYS软件进行流程模拟研究，在传统氮膨胀液化流程的基础上设计了一种高含乙烷天然气的液化分离流程，并根据天然气中的乙烷含量，取10%、20%、30%、40%共4种含量，分析比较了不同液化压力下流程的比功耗。为降低流程的能耗，在满足LNG产品中C2H6含量小于1%、液化乙烷纯度达到99.5%的情况下进一步研究了制冷剂流量、氮气膨胀机出口压力、节流温度的影响，在此基础上结合HYSYS软件中的优化器进一步对流程进行了优化。结果表明，对应10%、20%、30%、40%的乙烷含量，比功耗分别降低7.24%、6.13%、5.8%、7.07%。

Abstract

It is an economical and reasonable choice to separate ethane at the same time of natural gas liquefaction. On the basis of the conventional nitrogen expansion cycle

a nitrogen expansion liquefaction and separation process for natural gas with high ethane content is proposed. Four different kinds of natural gas

with ethane contents of 10%

20%

30% and 40%

are investigated with the proposed process by using the process simulation software HYSYS to analyze and compare the specific power consumption of the liquefaction process under different liquefaction pressure. In order to reduce the energy consumption of the process

the influence of the refrigerant flow rate

the outlet pressure of the nitrogen expander and the throttle temperature are further studied under the condition that the C2H6 content of the LNG product is less than 1% and the purity of the liquefied ethane is up to 99.5%. On this basis

the process is optimized in combination with the optimizer in the HYSYS software. The results show that

when the ethane contents are 10%

20%

30%

40%

the specific power consumption decreases by 7.24%

6.13%

5.8%

and 7.07%

respectively.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Recent advances and perspectives on sulfide-based photocatalysts for hydrogen production

Performance of alkali metal-loaded SrMnO3 oxygen carriers in chemical looping oxidative dehydrogenation of ethylbenzene

Advantages and risks of swirling cooling granulation towers

Zn-doped PdO/ZrO2 with rich oxygen vacancies for the synthesis of diphenyl carbonate from CO2 and phenol

Thermo-gas-elastic coupling performance analysis of high-speed and high-temperature foil face seals

Related Author

No data

Related Institution

No data

⁰