The Li3VO4 coated LiNi0.8Co0.1Mn0.1O2 cathode material was synthesized by wet fusion technology and high temperature solid phase method. The crystalline phase
morphology and microstructure of materials were studied by X-ray diffraction (XRD)
scanning electron microscope (SEM) and transmission electron microscope (TEM). The results show that Li3VO4 is evenly coated on the surface of LiNi0.8Co0.1Mn0.1O2 without changing the material structure and morphology of the raw materials. The coating thickness is 1-2 nm. The modification of LiNi0.8Co0.1Mn0.1O2 cathode material with different content of Li3VO4 shows that 3%(mass) Li3VO4 coated LiNi0.8Co0.1Mn0.1O2 has a capacity retention rate of 94.13% after 100 cycles under 1 C
which has the best multiplier performance and cycling performance. In addition
cyclic voltammetry (CV) and alternating current impedance (EIS) analysis show that Li3VO4 can increase Li+ conductivity
inhibit the side-effect between active material and electrolyte
and improve the electrochemical properties of materials.
Composite materials of Li2ZrO3 coated LiNi0.8Co0.1Mn0.1O2 and its electrochemical properties
Optimization for synthesis technology of LiNi0.8Co0.1Mn0.1O2 cathode material and electrochemical performance
Investigation on synthesis conditions of LiNi1-x-yCoxMnyO2 cathode material via co-precipitation
Effects of Cr-doping on structure and electrochemical performance of lithiumand manganese-rich cathode materials Li1.2Ni0.2Mn0.6O2
Synthesis of Li3PO4-doped Li(Ni0.5Co0.2Mn0.3)O2 by rheological phase method and its electrochemical performance as cathode material for Li-ion batteries
Related Author
SONG Liubin
LIU Jiao
XIAO Zhongliang
LI Lingjun
CAO Zhong
HU Chaoming
LI Xinyu
TANG Fuli
Related Institution
Hunan Provincial Key Laboratory of Materials Protection for Electric Power and Transportation, School of Chemistry and Biological Engineering, Changsha University of Science and Technology
College of Materials Science and Engineering, Changsha University of Science and Technology
Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences
Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences
College of Materials Science and Engineering, Jiangsu University