Compensation method for slug flow measurement in shale gas well using Venturi tube

NIU Shouzi; WU Haitao; XU Ying; LI Jianli; ZHANG Tao

doi:10.11949/j.issn.0438-1157.20180129

您当前的位置：

首页 >

文章列表页 >

Compensation method for slug flow measurement in shale gas well using Venturi tube

更新时间：2025-12-10

- Compensation method for slug flow measurement in shale gas well using Venturi tube
- CIESC Journal Issue 8, Pages: 3364-3372(2018)
- 作者机构：
  
  1. 天津大学电气自动化与信息工程学院,天津,300072
  2. 中国石油长城钻探工程公司四川页岩气项目部,四川,内江,641000
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20180129
  CLC： H814
- Online First：05 August 2018，
  
  Published：05 August 2018
- 稿件说明：
移动端阅览
NIU Shouzi, WU Haitao, XU Ying, et al. Compensation method for slug flow measurement in shale gas well using Venturi tube[J]. CIESC Journal, 2018, (8): 3364-3372.
DOI：

NIU Shouzi, WU Haitao, XU Ying, et al. Compensation method for slug flow measurement in shale gas well using Venturi tube[J]. CIESC Journal, 2018, (8): 3364-3372. DOI： 10.11949/j.issn.0438-1157.20180129.

摘要

为探索页岩气段塞流气液两相流量的测量方法，以Chisholm模型为基础，利用量纲分析法建立了文丘里湿气虚高模型和液相求解方法，并用其预测段塞流液膜区的气液相流量测量。同时，假设段塞流的液塞区为均相流，基于段塞流闭合模型和文丘里均相流模型，建立了液塞区气液相流量与液膜区气相流量的关系。提出利用一种以管道压力信号、文丘里收缩段与扩张段差压信号判断液塞来临的新方法，并加入逻辑回归法提升对液塞来临判断的准确性。在间歇性段塞流某页岩气平台井口进行了19 d的在线测试比对，结果表明，与大型气液计量分离器相比，文丘里湿气测量系统在加入了段塞流补偿方法后，气相测量19 d累计偏差从14%改善至1.08%，液相累计偏差从-57%改善至-11%。

Abstract

The flowrate measurement technology for the wet gas with intermittent slug flow was developed. The dimensionless analysis and the Chisholm correlation were applied to build the overreading correlation and compute the liquid flow rate. The flowrate of intermittent slug was regarded as the sum of the flowrate in the film region and the slug region. The wet gas measurement system was applied directly in the film region. The gas and liquid flowrates in the slug region were obtained by the slug closure model. By studying the effect of the slug on the pipe pressure and differential pressures of Venturi tube

a new method was carried out to determine liquid slug. Logistic regression was attached with it to improve the accuracy of the method. Industrial field testing for 19 d

the results showed that

due to the use of slug flow compensation technology

the cumulative deviation of gas flowrate was improved from 14% to 1.08% and the cumulative deviation of liquid flowrate was improved from -57% to -11%.

关键词

Keywords

references

Views

129

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental study on temperature distribution characteristics and flow measurement of horizontal wells in gas reservoir

Experimental study on effect of sloshing on performance of heat exchanger

Heat transfer of oil-gas slug flow in horizontal pipe

Development and verification of unified model based on slug flow for gas-liquid two-phase flow

Experimental study of heat transfer enhancement by pressure waves in cross flow tube bundles

Related Author

HUANG Yunlong

XU Jian

LIU Tong

YUAN Xintong

XU Qiang

ZHU Jianlu

CHANG Xueyu

HAN Hui

Related Institution

State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University

Research Institute of Petroleum Engineering, Sinopec Southwest China Oil and Gas Company

China University of Petroleum-East China/Key Laboratory of Oil and Gas Storage and Transportation in Shandong

Institute of Engineering Thermophysics, Chinese Academy of Sciences

CNOOC Gas Electric R & D Center

⁰