Simplified two-fluid model coupled with EMMS drag for simulating gas-solid flow

QIU Xiaoping; WANG Limin; YANG Ning

doi:10.11949/j.issn.0438-1157.20180065

您当前的位置：

首页 >

文章列表页 >

Simplified two-fluid model coupled with EMMS drag for simulating gas-solid flow

更新时间：2025-12-10

- Simplified two-fluid model coupled with EMMS drag for simulating gas-solid flow
- CIESC Journal Issue 5, Pages: 1867-1872(2018)
- 作者机构：
  
  1. 中国科学院过程工程研究所多相复杂系统国家重点实验室,北京,100190
  2. 中国科学院大学,北京,100049
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20180065
  CLC： Q021.1
- Online First：05 May 2018，
  
  Published：05 May 2018
- 稿件说明：
移动端阅览
QIU Xiaoping, WANG Limin, YANG Ning. Simplified two-fluid model coupled with EMMS drag for simulating gas-solid flow[J]. CIESC Journal, 2018, (5): 1867-1872.
DOI：

QIU Xiaoping, WANG Limin, YANG Ning. Simplified two-fluid model coupled with EMMS drag for simulating gas-solid flow[J]. CIESC Journal, 2018, (5): 1867-1872. DOI： 10.11949/j.issn.0438-1157.20180065.

摘要

提出了一种耦合EMMS曳力的简化双流体模型，该模型忽略固相黏度，用简单的经验关联式来计算固相压力，并且耦合考虑了介尺度结构的EMMS曳力模型来计算气固相间作用力。采用简化双流体模型成功模拟一个三维实验室尺度鼓泡流化床，数值模拟结果与完整双流体模型以及实验测量结果进行了比较，结果表明耦合EMMS曳力的简化双流体模型模拟结果与完整双流体模型耦合EMMS曳力的模拟结果基本相当，并且都与实验结果吻合良好，然而简化双流体模型的计算速度是完整双流体模型的两倍以上。这表明曳力模型在气固模拟中起着主导作用，而固相应力的作用是其次的，耦合EMMS曳力的简化双流体模型在实现工业规模气固反应器快速模拟中具有巨大潜力。

Abstract

A simplified two-fluid model (STFM) combined with energy-minimization multi-scale (EMMS) drag was proposed for accurate and fast simulation of gas-solid flows. In this new approach

solid phase pressure was calculated by an empirical correlation without considering solid phase viscosity and interphase momentum transfer was calculated from EMMS drag model by taking into account of coupled effects of meso-scale structures. A lab-scale bubbling fluidized bed was successfully simulated in 3D by this approach. STFM coupled with EMMS drag had comparable simulation results to FTFM coupled with EMMS drag

and both agreed well with experimental data. Compared to FTFM

STFM doubled simulation speed and thus significantly reduced computational cost. The gas-solid simulation suggests that drag model has a primarily dominant effect

followed by solid phase stress. The model of STFM combined with EMMS drag has large potentials in rapid simulation of commercial gas-solid reactors.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

A review on direct numerical simulation of gas-liquid-solid fluidized bed

Numerical simulation study of liquid-solid fluidized beds based on second-order moment model of particle dynamic restitution coefficient

Effect of particle viscosity in two-fluid model on homogeneous liquid-solid fluidization under Euler-Euler framework

The motion process of a droplet on a circular cylinder based on the lattice Boltzmann method

Study on synergistic modification of nitrogen-doped carbon coating and Ti⁴⁺ co-doping for lithium vanadium phosphate cathode materials

Related Author

MA Yongli

AN Shu

YANG Jie

LIU Mingyan

MA Yongli

LIU Mingyan

CHEN Xi

WANG Shuyan

Related Institution

School of Chemical Engineering and Technology, Tianjin University

State Key Laboratory of Chemical Engineering

State Key Laboratory of Chemical Engineering and Low-carbon Technology(Tianjin University)

State Key Laboratory of Continental Shale Oil, School of Petroleum Engineering, Northeast Petroleum University

Beijing Key Laboratory of Emission Surveillance and Control for Thermal Power Generation, North China Electric Power University

⁰