Pressure-compensated temperature control of Kaibel divided-wall column

QIU Jie; HUA Tao; HE Guichun; WU Xiang; SHEN Haitao; LING Hao

doi:10.11949/j.issn.0438-1157.20180024

您当前的位置：

首页 >

文章列表页 >

Pressure-compensated temperature control of Kaibel divided-wall column

更新时间：2025-12-10

- Pressure-compensated temperature control of Kaibel divided-wall column
- CIESC Journal Issue 11, Pages: 4798-4813(2018)
- 作者机构：
  
  化学工程联合国家重点实验室, 华东理工大学,上海,200237
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20180024
  CLC： Q202
- Online First：05 November 2018，
  
  Published：05 November 2018
- 稿件说明：
移动端阅览
QIU Jie, HUA Tao, HE Guichun, et al. Pressure-compensated temperature control of Kaibel divided-wall column[J]. CIESC Journal, 2018, (11): 4798-4813.
DOI：

QIU Jie, HUA Tao, HE Guichun, et al. Pressure-compensated temperature control of Kaibel divided-wall column[J]. CIESC Journal, 2018, (11): 4798-4813. DOI： 10.11949/j.issn.0438-1157.20180024.

摘要

Kaibel分壁精馏塔（Kaibel divided-wall column，KDWC）是分离三组分混合物DWC的进一步强化形式，可在一个塔内实现四组分混合物的高纯度分离。建立有效的控制结构是KDWC的研究关键，研究了KDWC分离苯、甲苯、邻二甲苯和均三甲苯四组分体系的动态过程，首次将压力补偿机制引入KDWC的控制，建立了压力补偿-温度控制结构（PTC），并考察了该结构与温度控制结构（TC）的控制效果。研究结果表明：TC可实现进料流量或组分发生±15%扰动后的平稳控制，少部分产品纯度不合格，最大余差为-0.007；PTC可实现进料流量或组分发生±20%扰动后的平稳控制，产品纯度均合格，最大余差约为-0.003，且调节时间缩短为5~8 h。压力补偿-温度控制结构通过对下侧线温度控制回路设定值的修正，有效地改善了控制效果。

Abstract

Kaibel divided-wall column (KDWC) could separate four-component mixture into high-purity products in a single column. It is an intensified arrangement of three-component divided-wall column (DWC). Developing effective control structure is one of the main challenges of the application of KDWC. This work investigated a KDWC for the separation of a mixture of benzene

toluene

o-xylene and 1

5-trimethylbenzene. A temperature control (TC) structure and a new pressure-compensated temperature control (PTC) structure were developed in this work. Dynamic responses of the two control structures are compared. Disturbances in feed rate or feed composition were used to evaluate the effectiveness of the two control structures. The results showed that TC could regain stable control in facing of ±15% disturbances of feed rate or feed composition with the maximal residual error as about -0.007. One product purity failed to meet the specification. PTC shows a better control result in facing of ±20% disturbances. All the purity of the four products could meet the specification with the maximal residual error as about -0.003 and the setting time as 5-8 h. The new control method for the KDWC could give a dynamic set-point for the lower side-stream control loop

and thus presenting a better control performance.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Steady-state behavior and control of Kaibel divided-wall column for aromatics separation

Research progress of ionic liquids in separation of aromatics/alkanes and olefins/alkanes

Synergistic metal-zeolite catalysis for conversion of polypropylene into aromatics

Simulation of temperature control in large-scale high and low temperature environmental laboratory

Design and control of nitrogen trifluoride distillation separation process

Related Author

LIN Xiyu

WU Hao

SHEN Benxian

LING Hao

YIN Mengfan

DENG Kaixin

ZHENG Tao

HUI Tianli

Related Institution

State Key Laboratory of Chemical Engineering, East China University of Science and Technology

State Key Laboratory of Heavy Oil Processing, China University of Petroleum

State Key Laboratory of Chemical Engineering and Low-carbon Technology, School of Chemical Engineering, East China University of Science and Technology

College of Mechanical and Energy Engineering, Beijing University of Technology

Beijing Kooland Technology Co., Ltd.

⁰