HU Yanjun, YU Fan, CHEN Jiang, et al. Study on release of polycyclic aromatic hydrocarbons during sewage sludge pyrolysis[J]. CIESC Journal, 2018, (8): 3662-3669.
DOI:
HU Yanjun, YU Fan, CHEN Jiang, et al. Study on release of polycyclic aromatic hydrocarbons during sewage sludge pyrolysis[J]. CIESC Journal, 2018, (8): 3662-3669.DOI: 10.11949/j.issn.0438-1157.20180018.
Study on release of polycyclic aromatic hydrocarbons during sewage sludge pyrolysis
The production and distribution of 16 kinds of polycyclic aromatic hydrocarbons (PAHs) in liquid
gas and solid three-phase products from sewage sludge pyrolysis from 350 to 1050℃ were studied. The results show that PAHs tend to be concentrated in liquid product
then into gaseous and solid products. The mass ratio of 16 kinds of PAHs contained in liquid product reaches the highest value 96% at 650℃. 16 kinds of EPA-PAHs in liquid products are all detected out. The mass ratio of ∑16PAHs in gas phase products at 750℃ reaches the highest value
21.3%. The content of PAHs in solid product is very low
which is 1%. At all the targeted pyrolysis temperatures
2
3 and 4 rings of PAHs occupied a leading position in the resulting products. The mass ratio of ∑2
3
4 rings of PAHs was over 95%
and the highest content of EPA-PAHs in liquid phase products is 15.25 mg·kg-1 at 850℃. In the gas phase
it mainly contains naphthalene (NaP)
acenaphthylene (Acp)
fluorene (Flu) and anthracene (Ant)
and the high ring of PAHs are not detected out. During a high temperature sludge pyrolysis
the thermos-chemical reaction of large molecular structure reaches a peak
along with the functional-groups decomposition
synthesis
and cyclization reactions
the concentration of ∑low PAHs in gas product reached 7.248 mg·kg-1. The variation of PAHs TEQ in the pyrolysis products from different temperatures basically agrees their concentration distributions. The TEQ of PAHs in the liquid product is up to 1.129 at 850℃.