POD analysis of flow field in horizontal two-group nozzle impinging stream reactor

ZHANG Jianwei; MA Fanrong; ZHANG Zhigang; FENG Ying

doi:10.11949/j.issn.0438-1157.20171615

您当前的位置：

首页 >

文章列表页 >

POD analysis of flow field in horizontal two-group nozzle impinging stream reactor

更新时间：2025-12-10

- POD analysis of flow field in horizontal two-group nozzle impinging stream reactor
- CIESC Journal Issue 7, Pages: 2916-2925(2018)
- 作者机构：
  
  沈阳化工大学能源与动力工程学院,辽宁,沈阳,110142
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20171615
  CLC： Q021.1
- Online First：05 July 2018，
  
  Published：05 July 2018
- 稿件说明：
移动端阅览
ZHANG Jianwei, MA Fanrong, ZHANG Zhigang, et al. POD analysis of flow field in horizontal two-group nozzle impinging stream reactor[J]. CIESC Journal, 2018, (7): 2916-2925.
DOI：

ZHANG Jianwei, MA Fanrong, ZHANG Zhigang, et al. POD analysis of flow field in horizontal two-group nozzle impinging stream reactor[J]. CIESC Journal, 2018, (7): 2916-2925. DOI： 10.11949/j.issn.0438-1157.20171615.

摘要

利用二维高速粒子图像测速技术研究双组分层水平对置撞击流湍流场，考察了双组喷嘴在不同Re、不同直径及上下径向射流不同工况下的流动结构，对速度场进行POD分解，提取流场中含能大尺度结构。结果表明，低阶本征模态拥有大尺度涡旋结构，流场涡旋结构明显，瞬时流场能量主要集中在一阶模态，易于描述整个流场的流动特征，脉动场的模态重构可以准确还原流场中的涡结构。L=3d工况下，不对称流场能量高于对称流场；低阶模态能量随喷嘴Re的增大而增大，而随喷嘴直径增大呈先递增后递减的趋势，直径d=10 mm的工况下所对应的一阶模态能量最高，涡强最大。

Abstract

Two-dimensional high-speed particle image velocimetry was used to study horizontal-confronted twogroup-layered impinging turbulent flow fields. Flow structures of two sets of nozzles were analyzed under conditions of different Re

nozzle diameter

upper and lower radial jets. The velocity field was decomposed by POD to extract large scale energy-carrying structure. The results show that low-order intrinsic mode features a large-scale vortex structure with obvious vortex structures in flow field and energy of transient flow field mainly concentrates in the first-order mode. Flow characteristics of whole flow field is easily described such that modal reconstruction of pulsating field could accurately reestablish vortex structures in the flow field. Under condition of L=3d

asymmetric flow field energy was higher than that of symmetric flow filed

low order modal energy was increased with increasing nozzle Re

but was first increased then decreased with the increase of nozzle diameter. Under condition of 10 mm diameter

first order mode energy was the highest and vorticity was the maximum.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Energy-economic-environmental analysis of coal-to-urea considering green power-hydrogen-heat substitution

Influence of aluminum particle size on energy output characteristics and thermal stability of emulsion explosive

Charge performance of packed bed thermal storage unit with phase change material having different melting points

Thermodynamic study of germanium-impurity competitive deposition in GeCl4-MxCly-H2 system

Identification of gas-liquid two-phase flow patterns in a riser based on recursive characteristics and CNN

Related Author

LIU Yongzhong

KANG Lixia

WU Le

WANG Shuai

DUAN Ruiyang

WANG Xuguang

CHENG Yangfan

YAN Shilong

Related Institution

Department of Chemical Engineering, Xi’an Jiaotong University

China Coal Energy Research Institute Company Limited

Department of Chemical Engineering, Northwest University

School of Civil Engineering, Anhui University of Science and Technology,.

Beijing General Research Institute of Mining and Metallurgy

⁰