HUANG Jin, LI Xiaopeng, WANG Ting, et al. Heat transfer performance of copper surface treatment MWCNTs/PA based on composites[J]. CIESC Journal, 2018, (7): 2956-2963.
DOI:
HUANG Jin, LI Xiaopeng, WANG Ting, et al. Heat transfer performance of copper surface treatment MWCNTs/PA based on composites[J]. CIESC Journal, 2018, (7): 2956-2963.DOI: 10.11949/j.issn.0438-1157.20171514.
Heat transfer performance of copper surface treatment MWCNTs/PA based on composites
Different coating treatments were carried out on the surface of copper plate from the point of view of corrosion and heat transfer of heat exchanger:polyacrylate (PA) single-sided and double-sided coating
MWCNTs/PA composite single-sided and double-sided coating
and noncoating copper plate. The heat transfer coefficient under different treatment conditions was studied by convective heat transfer experiment. The results show that the heat transfer coefficient of the copper plate is reduced by 21.91% and 40.00%
respectively
compared with the noncoating copper plate. The heat transfer coefficient of the copper plate treated with MWCNTs/PA composite material is improved
and the heat transfer coefficient of the copper plate treated with single and double sided MWCNTs/PA is improved by 16.74% and 27.49% respectively
Research progress on bio-based anti-corrosion coating
Experimental study on phase change heat storage and release performance of R-134a pulsating heat pipe
Research progress on the water resistance of degradable cellulose-based materials
Summary of improving erosion and corrosion resistance of heat exchange surfaces in boilers through HVOF technology
Study on anticorrosive properties of epoxy soybean oil resin coating
Related Author
WANG Zhi
ZHAO Song
YANG Tianxiang
LIU Xiaoyang
CHEN Zihan
DU Wenjing
ZHANG Yifei
LIU Fangchen
Related Institution
Chemical Engineering Research Center, School of Chemical Engineering and Technology, State Key Laboratory of Chemical Industry and Low-carbon Technology, Tianjin Key Laboratory of Membrane Science and Desalination Technology, Tianjin Collaborative Innovation Center of Chemical Science and Engineering, Tianjin University
School of Energy and Power Engineering, Shandong University
School of Chemistry and Chemical Engineering, Xi’an University of Architecture and Technology
Key Laboratory of Gold and Resources of Shaanxi Province
School of Metallurgical Engineering, Xi’an University of Architecture and Technology