Study of urine-powered microbial fuel cell anode modified by graphene-type novel materials

ZHOU Yu; LIU Zhongliang; HOU Junxian; CHEN Wenwen; LOU Xiaoge; LI Yanxia

doi:10.11949/j.issn.0438-1157.20171501

您当前的位置：

首页 >

文章列表页 >

Study of urine-powered microbial fuel cell anode modified by graphene-type novel materials

更新时间：2025-12-10

- Study of urine-powered microbial fuel cell anode modified by graphene-type novel materials
- CIESC Journal Issue 6, Pages: 2790-2796(2018)
- 作者机构：
  
  北京工业大学环境与能源工程学院教育部传热强化与过程节能重点实验室,北京,100124
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20171501
  CLC： K6
- Online First：05 June 2018，
  
  Published：05 June 2018
- 稿件说明：
移动端阅览
ZHOU Yu, LIU Zhongliang, HOU Junxian, et al. Study of urine-powered microbial fuel cell anode modified by graphene-type novel materials[J]. CIESC Journal, 2018, (6): 2790-2796.
DOI：

ZHOU Yu, LIU Zhongliang, HOU Junxian, et al. Study of urine-powered microbial fuel cell anode modified by graphene-type novel materials[J]. CIESC Journal, 2018, (6): 2790-2796. DOI： 10.11949/j.issn.0438-1157.20171501.

摘要

尿液微生物燃料电池（urine-powered microbial fuel cell，UMFC）能够将尿液中有机物的化学能转化为电能，阳极是影响其产能的关键因素。黑磷（BP）、膨胀石墨（EG）和羧基化石墨烯（COOH-GN）是三种典型的石墨烯类新型材料，分别用这三种材料对阳极碳布进行修饰处理得到了三种电极（BP/CC、EG/CC和COOH-GN/CC）。修饰后的电极表面明显变粗糙，且碳布阳极阻抗均有一定程度的减小。分别以BP/CC、EG/CC和COOH-GN/CC三种电极为阳极运行UMFC，获得的最大电压分别为587.71，512.46和492.49 mV，最大功率密度分别为5254.43，3925.44和3252.05 mW/m3，BP/CC阳极UMFC的性能最好。

Abstract

Urine-powered microbial fuel cells (UMFCs) are bioelectrochemical system that can recover energy from urine-a typical wastewater produced in urban and aerospace ships. The anode is the key unit determining the UMFC performance. To improve its performance

black phosphorus (BP)

expanded graphite (EG) and carboxyl graphene (COOH-GN) which are three graphene-type novel materials were used to modify carbon cloth anode and three anodes (BP/CC

EG/CC and COOH-GN/CC) were thus fabricated. The surface of the carbon cloth becomes rougher after modification. The results of electrochemical impedance spectroscopy tests demonstrated that the modified anodes have low resistance and excellent electrochemical properties. Using BP/CC

EG/CC and COOH-GN/CC as the UMFC anodes respectively

the UMFCs yielded maximum voltage output of 587.71

512.46 and 492.49 mV

respectively

power density of 5254.43

3925.44 and 3252.05 mW/m3

respectively

which clearly shows that the BP modification is the best.

关键词

Keywords

references

Views

117

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Microbial fuel cell anode modified by chemical oxidation

Cold-start characterization of PEMFC based on quasi-two-dimensional modeling

Construction and performance optimization of five-chamber microbial desalination cell for enhanced desalination and bioelectricity generation

Study on influence of two-phase flow in channels considering surface wettability of gas diffusion layers on fuel cell performance

Analysis of influence of operating temperature on water distribution, proton transport and performance of PEMFC

Related Author

ZHOU Yu

LIU Zhongliang

HOU Junxian

YANG Siqi

LI Yanxia

QIU Wenge

WEI Jiyuan

LI Shengping

Related Institution

School of Environmental and Energy Engineering, Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Ministry of Education, Beijing University of Technology

Department of Chemistry and Chemical Engineering, School of Environmental and Energy Engineering, Beijing University of Technology

School of Automotive Engineering, Wuhan University of Technology

School of Energy and Power Engineering, Huazhong University of Science and Technology

Institute of Urban Agriculture, Chinese Academy of Agricultural Sciences

⁰