Energy-saving analysis and experimental study of a new heat-source tower solution regeneration system

WEN Xiantai; CAO Xianqi; YU Pengfei; YU Jiao

doi:10.11949/j.issn.0438-1157.20171227

您当前的位置：

首页 >

文章列表页 >

Energy-saving analysis and experimental study of a new heat-source tower solution regeneration system

更新时间：2025-12-10

- Energy-saving analysis and experimental study of a new heat-source tower solution regeneration system
- CIESC Journal Issue 5, Pages: 2226-2232(2018)
- 作者机构：
  
  1. 南京工程学院能源与动力工程学院,江苏,南京,211167
  2. 东南大学能源与环境学院,江苏,南京,210096
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20171227
  CLC： K123
- Online First：05 May 2018，
  
  Published：05 May 2018
- 稿件说明：
移动端阅览
WEN Xiantai, CAO Xianqi, YU Pengfei, et al. Energy-saving analysis and experimental study of a new heat-source tower solution regeneration system[J]. CIESC Journal, 2018, (5): 2226-2232.
DOI：

WEN Xiantai, CAO Xianqi, YU Pengfei, et al. Energy-saving analysis and experimental study of a new heat-source tower solution regeneration system[J]. CIESC Journal, 2018, (5): 2226-2232. DOI： 10.11949/j.issn.0438-1157.20171227.

摘要

针对热源塔热泵系统冬季运行时存在的溶液稀释问题，提出了一种基于真空沸腾冷凝的新型热源塔溶液再生系统，并构建了相应的实验台。实验测试结果表明：随着溶液浓度的增加，溶液再生速率和再生效率存在先增加后降低的趋势，在乙二醇质量浓度为26%时达到最大；系统真空压力的增加可以极大提高溶液再生效率和再生速率，但其运行可靠性受到影响；进口溶液温度在36℃且电加热出口阀门开启时间为12 s时存在溶液再生效率的最大值。该溶液浓缩装置正常运行时溶液再生效率可达到3.40 kg/（kW·h）以上，溶液再生速率可达到550 kg/d，与传统的溶液再生相比，具有很好的节能性。

Abstract

The heat-source tower heat pump system has the problem of solution dilution when it operates in winter. A solution regeneration design of heat-source tower based on vacuum boiling and condensation integration is proposed

and experimental tests are constructed. The results show that:with the increase of solution concentration

regeneration efficiency and regeneration rate have the trend of increasing first and then decreasing later

and have the best data at the ethylene glycol concentration of 26%. With the increase of vacuum value

regeneration efficiency and regeneration rate increase greatly

but the reliability of system can be decreased. With the inlet solution temperature of 36℃

and with electric heater outlet valve open time 12 s

regeneration efficiency and regeneration rate can be reached to the best. In the normal time

regeneration efficiency can be higher than 3.40 kg/(kW·h) and regeneration rate can be higher than 550 kg/d. Compared with traditional solution regeneration

the energy-saving potential is huge.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental study of a novel solution regeneration system for heat-source tower under unsteady state

Application of reaction engineering approach in modelling vacuum baking of lithium battery

Research progress on frost-free air source heat pump technology

Characteristics of dynamic ice-making via Al2O3-H2O nanofluid's vacuum flash

Experimental characteristics of ice preparation via Cu-nano fluid's vacuum flash

Related Author

Jiao YU

Xianqi CAO

Pengfei YU

Ning CAI

Yifan MAO

Xiantai WEN

Wen CHEN

Xiaodong CHEN

Related Institution

Amperex Technology Limited

School of Chemical and Environmental Engineering,College of Chemistry, Chemical Engineering and Materials Science, Soochow University

School of Energy and Power Engineering, Shandong University

Department of Energy and Power Engineering, Shandong University of Technology

Institute of Cool Thermal Storage Technology, Shanghai Maritime University

⁰