Inverse Nyquist array for multivariable control system using constant diagonal dominant pre-compensation matrix

XU Feng; WANG Qihang; LUO Xionglin

doi:10.11949/j.issn.0438-1157.20171138

您当前的位置：

首页 >

文章列表页 >

Inverse Nyquist array for multivariable control system using constant diagonal dominant pre-compensation matrix

更新时间：2025-12-10

- Inverse Nyquist array for multivariable control system using constant diagonal dominant pre-compensation matrix
- CIESC Journal Issue 3, Pages: 1102-1113(2018)
- 作者机构：
  
  中国石油大学(北京)自动化系,北京,102249
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20171138
  CLC： P273
- Online First：05 March 2018，
  
  Published：05 March 2018
- 稿件说明：
移动端阅览
XU Feng, WANG Qihang, LUO Xionglin. Inverse Nyquist array for multivariable control system using constant diagonal dominant pre-compensation matrix[J]. CIESC Journal, 2018, (3): 1102-1113.
DOI：

XU Feng, WANG Qihang, LUO Xionglin. Inverse Nyquist array for multivariable control system using constant diagonal dominant pre-compensation matrix[J]. CIESC Journal, 2018, (3): 1102-1113. DOI： 10.11949/j.issn.0438-1157.20171138.

摘要

化工过程中的多变量系统变量之间往往存在耦合作用，在控制系统设计时一般将传递函数阵对角优势化，对角优势化后按多个单变量系统进行设计。由于传递函数逆阵的对角优势化更容易实现，本文采用伪对角化方法设计常数对角优势补偿阵实现传递函数逆阵的对角优势化，在一个或多个频率点上通过使开环传递函数逆阵每行的非对角项元素模平方之和最小，实现对角优势。然后，利用逆Nyquist阵列设计法对补偿后的系统设计控制器，基于逆Nyquist稳定判据，通过绘制优势度曲线和Gershgorin带判断系统的优势程度，根据Gershgorin带选定反馈矩阵的参数范围，按照单变量控制系统的方法设计动态补偿器，使系统满足动态控制品质的要求。最后通过3个示例说明本文的设计方法简便，且具有良好的控制性能。

Abstract

There are coupling effects between input and output variables of multivariable system of chemical processes. In control system design

diagonal dominance is usually implemented in transfer function matrix and then several single loop controllers are deployed. Since it is easy to define diagonal dominance by inversing transfer function

a pseudo diagonal dominance method was used to develop constant diagonal dominant compensation matrix for inverse transfer function. First

diagonal dominance was obtained by minimizing sum of module value squares of off-diagonal elements in each row of inverse open-loop transfer-function matrix at one or more frequency points. Then

inverse Nyquist array design method was adopted to design controller for the compensated system. Based on inverse Nyquist stability criterion

diagonal dominance degree was decided from dominance curve and Gershgorin diagram. Parameter range of feedback matrix was also selected from Gershgorin diagram. Dynamic compensators were designed according to method of single variable system

so that the system met quality requirements of dynamic controls. Finally

study on three examples show that the design method is simple and the control performance is excellent.

关键词

Keywords

references

Views

110

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Multivariable control system based on PID diagonal dominant compensation matrix

Corrosion health status assessment method for refining unit pipeline based on GLAE-MLP

A dual-stream multirate GRU soft sensor modeling based on data chunk strategy

ESO-based action dependent heuristic dynamic programming control and its application in a four-stage CSTR process

Research on process control of preparation of mesophase pitch by fluid catalytic cracking slurry oil

Related Author

HU Jinqiu

MA Mingjun

ZHANG Laibin

DONG Jiayan

ZHANG Zhen

SHI Xudong

WANG Fazheng

XIONG Weili

Related Institution

College of Safety and Ocean Engineering, China University of Petroleum

Key Laboratory of Oil and Gas Safety and Emergency Technology, Ministry of Emergency Management

Key Laboratory of Oil and Gas Production Equipment Quality Inspection and Health Diagnosis, State Administration for Market Regulation

School of Internet of Things Engineering, Jiangnan University

Key Laboratory of Advanced Process Control for Industry (Ministry of Education), Jiangnan University

⁰