Bimetallic catalyst has been a hot research topic as it can realize one-pot synthesis of polyethylene with bimodal molecular weight distribution (MWD). The kinetics of ethylene homopolymerization with a novel Cr-iV bimetallic catalyst and corresponding monometallic S-2 and iV catalyst were studied at various experimental conditions. MWD deconvolution of polymers made by these catalysts showed interaction between Cr and V active centers in the Cr-iV bimetallic catalyst
reduced the activity of Cr centers
while activity of V centers was improved. Polymerization temperature almost did not change mass fractions of polymers produced by two active centers. The simplified single-center kinetic model for ethylene homopolymerization was employed to describe polymerization behaviors of Cr and V centers in Cr-iV bimetallic catalyst. Kinetic parameters of each active center were estimated by fitting experimental results of polymerization rates with model prediction. Compared to monometallic catalyst
Cr center in the Cr-iV catalyst had decreased chain propagation rate constant
which lead to reduction of polymerization activity
whereas V center in the Cr-iV catalyst had decreased chain deactivation rate constant
Thermo-oxidative degradation characteristics of TPT backsheet from end-of-life photovoltaic modules
Molecular dynamics simulation study on hydrogen permeation performance and aging mechanism of PA6 inner liner material for type Ⅳ hydrogen storage cylinders
Preparation and adsorption properties of temperature sensitive poly(N-isopropylacrylamide) /monosodium glutamate/ chitosan composites
Preparation of pitch-based carbon sheet anode by diketone oxygen-crosslink strategy and its potassium storage properties
Research progress of electrolyte for lithium-sulfur batteries: molecular design and application
Related Author
WANG Shangming
LI Xiaofeng
FANG Qiuyu
WANG Qiang
ZHANG Guoping
CHEN Yunan
CHEN Bin
NIU Bangbang
Related Institution
State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University
College of Mechanical and Transportation Engineering, China University of Petroleum
Beijing Key Laboratory of Process Fluid Filtration and Separation
China Special Equipment Inspection and Research Institute
Key Laboratory of Safety of Hydrogen Energy Storage and Transportation Equipment, State Administration for Market Regulation