Experimental research and numerical analysis of heat collector performance for waste heat recovery

DU Wenjing; SUN Huimin; CHENG Lin

doi:10.11949/j.issn.0438-1157.20171001

您当前的位置：

首页 >

文章列表页 >

Experimental research and numerical analysis of heat collector performance for waste heat recovery

更新时间：2025-12-10

- Experimental research and numerical analysis of heat collector performance for waste heat recovery
- CIESC Journal Issue 5, Pages: 1946-1955(2018)
- 作者机构：
  
  1. 山东大学能源与动力工程学院,山东,济南,250061
  2. 山东大学热科学与工程研究中心,山东,济南,250061
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20171001
  CLC： K-9
- Online First：05 May 2018，
  
  Published：05 May 2018
- 稿件说明：
移动端阅览
DU Wenjing, SUN Huimin, CHENG Lin. Experimental research and numerical analysis of heat collector performance for waste heat recovery[J]. CIESC Journal, 2018, (5): 1946-1955.
DOI：

DU Wenjing, SUN Huimin, CHENG Lin. Experimental research and numerical analysis of heat collector performance for waste heat recovery[J]. CIESC Journal, 2018, (5): 1946-1955. DOI： 10.11949/j.issn.0438-1157.20171001.

摘要

以回转窑表面余热回收用集热器为研究对象，采用实验研究和数值计算方法，分析了集热器的流动和传热特性及其在线运行规律。实验中选取了一种辐射型和两种耦合型结构的集热器进行研究，分析了出口水温、出口压力和工质流量的变化对集热器性能的影响，总结了三种结构类型的集热器在换热量上的变化规律。采用Matlab软件编程进行数值求解，将数值计算结果与实验结果对比，验证了数值计算的准确性。数值分析了入口空气温度、入口空气流速和窑体温度变化时对应的集热器内熵增、火积耗散以及有效度的变化规律。相关计算结果为集热器的优化设计和在线运行参数的选择提供了数据支持。

Abstract

The research object is a novel heat collector installed on the surface of the rotary kiln

which is used for waste heat recovery from the kiln. The experimental and numerical calculation methods are used to analyze the flow and heat transfer characteristics of this equipment. In the process of experimental research

one radiant type heat collector and two coupled type heat collectors are investigated to study the influence between the variation of outlet water temperature

outlet pressure and flow mass on the performance of the collector. Numerical calculations are also performed to obtain working performances of the heat collector using Matlab software. Both numerical and experimental results are compared to verify the accuracy of numerical calculations. The changes of the inlet air temperature

inlet air flow rate and kiln body temperature are numerically analyzed. Related results provide data support for the optimization design of the collector and the selection of the online operating parameters.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Thermo-gas-elastic coupling performance analysis of high-speed and high-temperature foil face seals

Study on performance enhancement and cold retention characteristics of solid packed bed cold energy storage

Calibration method and experimental validation for resolving inverse heat conduction problem with constant temperature on back surface

Numerical study on heat transfer characteristics of a novel rectangular printed circuit heat exchanger

Experimental study on influence of inner tube movement on charging-discharging performance in horizontal shell-and-tube phase change thermal energy storage exchanger

Related Author

CHEN Yuan

ZHENG Shiyuan

LI Yuntang

XIONG Dianfeng

WANG Bingqing

PENG Xudong

WANG Chenchen

ZHANG Jinya

Related Institution

College of Mechanical and Electical Engineering, China Jiliang University

AECC Changjiang Engine Co., Ltd.

College of Mechanical Engineering, Zhejiang University of Technology

School of Mechanical and Storage and Transportation Engineering, China University of Petroleum

College of Energy Engineering, Zhejiang University

⁰