Effect of activated carbon pore size distribution on low-mercury catalyst performance for acetylene hydrochlorination

JIANG Luo; CHEN Biaohua; ZHANG Jirui; FU Jiquan

doi:10.11949/j.issn.0438-1157.20170982

您当前的位置：

首页 >

文章列表页 >

Effect of activated carbon pore size distribution on low-mercury catalyst performance for acetylene hydrochlorination

更新时间：2025-12-10

- Effect of activated carbon pore size distribution on low-mercury catalyst performance for acetylene hydrochlorination
- CIESC Journal Issue 1, Pages: 423-428(2018)
- 作者机构：
  
  1. 北京化工大学化工资源有效利用国家重点实验室,北京,100029
  2. 北京华宇同方化工科技开发有限公司,北京,100039
  3. 北京服装学院,北京,100029
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20170982
  CLC： Q124.4+2
- Online First：05 January 2018，
  
  Published：05 January 2018
- 稿件说明：
移动端阅览
JIANG Luo, CHEN Biaohua, ZHANG Jirui, et al. Effect of activated carbon pore size distribution on low-mercury catalyst performance for acetylene hydrochlorination[J]. CIESC Journal, 2018, (1): 423-428.
DOI：

JIANG Luo, CHEN Biaohua, ZHANG Jirui, et al. Effect of activated carbon pore size distribution on low-mercury catalyst performance for acetylene hydrochlorination[J]. CIESC Journal, 2018, (1): 423-428. DOI： 10.11949/j.issn.0438-1157.20170982.

摘要

以煤粉为碳源，加入磷酸氢二钠、磷酸二氢钾为辅助剂，通过水蒸气活化的方法制备了具有不同孔径结构分布的活性炭载体。利用氮气吸脱附曲线、亚甲基蓝吸附曲线、X射线衍射（XRD）及扫描电子显微镜（SEM）分析技术对活性炭载体和催化剂进行表征。在等温固定床反应器中模拟实际生产转换器单管装置，考察了不同孔径分布的载体对催化剂催化性能的影响。结果表明：调节不同的磷酸氢二钠、磷酸二氢钾配比量和活化蒸汽量，可以制得不同比表面积和孔径分布活性炭载体，中孔率可达81%；高中孔含量的催化剂载体有利于活性中心的分散，且由其制备的催化剂在高空速下活性稳定性更好，寿命更长。

Abstract

Activated carbon carriers with various pore size distributions were prepared by using pulverized coal as carbon source

dibasic sodium phosphate and potassium phosphate monobasic as adjuvant. The activated carbon carrier and catalyst were characterized by nitrogen adsorption and desorption

methylene blue adsorption

X-ray diffraction (XRD) and scanning electron microscopy (SEM). The effect of pore size distribution on catalyst performance was studied in an isothermal fixed-bed reactor

which simulated industry-scale single tubular conversion unit. The results showed that activated carbon of different specific surface area and pore size distribution can be prepared by adjusting amount of dibasic sodium phosphate

potassium phosphate monobasic and steam. Activated carbon with mesoporosity was obtained to 81%. Activated carbon carrier with high mesopores is beneficial to dispersion of active center

and the corresponding catalyst has excellent stabilized activity and long lifetime at high air velocity.

关键词

Keywords

references

Views

134

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Pore network model of low-temperature nitrogen adsorption-desorption in mesoporous materials

Estimation of appropriate pore size distribution for diesel desulfurization adsorbent based on hindered diffusion model

Estimation of pore size distribution of porous media based on percolation theory

Activation characteristics comparison of activated carbons prepared from biomass and lignite

Preparation and electrochemical properties of PF-based activated carbon

Related Author

MENG Jinlin

WANG Yu

ZHANG Qunfeng

YE Guanghua

ZHOU Xinggui

CHEN Xiaohui

HUANG Qingming

XIONG Ying

Related Institution

State Key Laboratory of Chemical Engineering, East China University of Science and Technology

National Engineering Research Center for Chemical Fertilizer Catalyst, School of Chemical Engineering, Fuzhou University

Testing Center of Fuzhou University

Environmental Science and Engineering Research Center, Shenzhen Graduate School, Harbin Institute of Technology

School of Environment and Material Engineering, Yantai University

⁰