Cavitation effect and leakage control mechanism of reverse spiral grooves mechanical end face seals

MA Xuezhong; MENG Xiangkai; WANG Yuming; ZHAO Wenjing; SHEN Mingxue; PENG Xudong

doi:10.11949/j.issn.0438-1157.20170726

您当前的位置：

首页 >

文章列表页 >

Cavitation effect and leakage control mechanism of reverse spiral grooves mechanical end face seals

更新时间：2025-12-10

- Cavitation effect and leakage control mechanism of reverse spiral grooves mechanical end face seals
- CIESC Journal Issue 4, Pages: 1558-1568(2018)
- 作者机构：
  
  浙江工业大学过程装备及其再制造教育部工程研究中心,浙江,杭州,310014
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20170726
  CLC： H117.2
- Online First：05 April 2018，
  
  Published：05 April 2018
- 稿件说明：
移动端阅览
MA Xuezhong, MENG Xiangkai, WANG Yuming, et al. Cavitation effect and leakage control mechanism of reverse spiral grooves mechanical end face seals[J]. CIESC Journal, 2018, (4): 1558-1568.
DOI：

MA Xuezhong, MENG Xiangkai, WANG Yuming, et al. Cavitation effect and leakage control mechanism of reverse spiral grooves mechanical end face seals[J]. CIESC Journal, 2018, (4): 1558-1568. DOI： 10.11949/j.issn.0438-1157.20170726.

摘要

针对机械端面密封的反向螺旋槽结构，基于遵循质量守恒的JFO空化边界条件，采用SUPG有限元方法求解Reynolds方程，研究了反向螺旋槽的空化效应，基于此，提出了一种新型的正反向螺旋槽组合端面密封结构，分析了不同工况条件下的密封性能。结果表明：反向螺旋槽区域易发生液膜空化，周期性分布的空化区会显著影响端面流场，空化区的低压力可将内径侧流体抽吸到密封端面，实现上游泵送。新型正反向螺旋槽端面密封结构结合了反向螺旋槽产生的泄漏控制作用和正向螺旋槽产生的流体动压效应，同时具备良好的上游泵送能力和动压承载能力。

Abstract

The Reynolds equation of a reverse spiral groove mechanical end face seals was solved based on the JFO cavitation boundary condition by the Stream-Upwind/Petrov-Galerkin (SUPG) finite element method. The cavitation effect of the reverse spiral grooves was investigated. A novel reverse-spiral-grooved seal end face combined with forward-spiral grooves was proposed. The sealing performance under the different operating conditions was analyzed. The results show that the liquid film in grooved zones is prone to cavitation for the reverse spiral groove end face seal. The cavitation zones significantly affect the flow field distribution of the fluid film. The fluid at the inner side can be absorbed into the cavitation zones due to the pressure difference between the cavitation zones and the inner side. The novel seal end face combines the leakage control effect of the reverse spiral grooves and the hydrodynamic effect of the forward spiral grooves

and shows good upstream pumping capacity and load carrying capacity.

关键词

Keywords

references

Views

206

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Analysis of turbulence effect on face groove cooling performance of high-speed mechanical seals

Research on friction and wear characteristics of mechanical seals in start-stop phases based on 3D fractal end-face characterization

Effect of irregular V-shaped surface texture on the performance of mechanical face seal

Numerical simulation of mixing process in different opposite-rotating horizontal twin-shaft kneaders

Experimental study of heat transfer enhancement by pressure waves in cross flow tube bundles

Related Author

ZHANG Weizheng

ZHAO Jijun

MA Xuezhong

ZHANG Qixuan

PANG Yixiang

ZHANG Juntao

CHEN Kaifang

LI Shuangxi

Related Institution

College of Petrochemical Engineering, Lanzhou University of Technology

Research Center of Fluid Sealing Technology, Beijing University of Chemical Technology

College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology

College of Mechanical Engineering, Zhejiang University of Technology

State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University

⁰