Effects of sintering parameters on performance of Ni porous wick

SONG He; DONG Jingming; HAN Zhitao; CHEN Xuli; LI Celue; PAN Xinxiang

doi:10.11949/j.issn.0438-1157.20170618

您当前的位置：

首页 >

文章列表页 >

Effects of sintering parameters on performance of Ni porous wick

更新时间：2025-12-10

- Effects of sintering parameters on performance of Ni porous wick
- CIESC Journal Issue S1, Pages: 178-183(2017)
- 作者机构：
  
  大连海事大学轮机热能工程研究所,辽宁,大连,116026
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20170618
  CLC： K124
- Online First：31 August 2017，
  
  Published：31 August 2017
- 稿件说明：
移动端阅览
SONG He, DONG Jingming, HAN Zhitao, et al. Effects of sintering parameters on performance of Ni porous wick[J]. CIESC Journal, 2017, (S1): 178-183.
DOI：

SONG He, DONG Jingming, HAN Zhitao, et al. Effects of sintering parameters on performance of Ni porous wick[J]. CIESC Journal, 2017, (S1): 178-183. DOI： 10.11949/j.issn.0438-1157.20170618.

摘要

毛细芯（多孔介质）是环路热管的核心部件，金属粉末烧结是目前制备毛细芯的常用方法，研究烧结参数对毛细芯性能的影响有利于提高环路热管的性能。以镍粉为原料，利用烧结的方法制备了具有不同烧结参数的毛细芯，实验研究了烧结参数对毛细芯微观结构和性能参数的影响。实验表明，烧结参数对毛细芯的微观结构和性能参数具有明显的影响。随着烧结温度的升高和保温时间的延长，毛细芯的孔隙率、平均孔径和渗透率呈下降趋势；毛细芯的抽吸质量和抽吸速率与毛细芯的渗透率呈正相关；在750~800℃范围内改变烧结温度和在40~50 min范围内改变保温时间，毛细芯结构和性能参数变化明显。

Abstract

Sintered nickel porous wick is a key component in the loop heat pipe system

metal powder sintering is a common method to product porous wicks

performance of loop heat pipe will be improved by investigating the effects of sintering parameters on the microstructures and characteristics of wicks. In this paper

sintered nickel porous wicks were fabricated

besides

effects of sintering temperature and time on the microstructure and characteristics of wicks were studied. Sintering temperature changed from 750℃ to 850℃ and sintering time varied in the range of 30-40 min. Results reveal that sintering parameters affect the microstructure and characteristics of wicks obviously. Voidage

average pore size and permeability decreases with increasing sintering temperature and time. Capillary pumping amount and capillary pumping speed are positive to permeability of the wick. Moreover

the microstructure and characteristics of wicks are sensitive to sintering temperature of 750-800℃ and sintering time of 40-50 min.

关键词

Keywords

references

Views

103

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of sintering additives on properties of silicon carbide porous ceramics prepared at low temperature

Synthesis and characterization of copper-based graphene composite catalyst

Preparation and characterization of superhydrophobic rutile titania-silica nano complex oxides

Preparation of DMAPS-modified PVDF membranes via pre-radiation-induced graft polymerization for effective oil/water emulsion separation

Progress in preparation and application of porous fiber materials

Related Author

Jian ZHOU

Qian JIANG

Yi YANG

Shasha FENG

Zhaoxiang ZHONG

Weihong XING

Yongsheng WANG

Xiaolin LAN

Related Institution

National Engineering Research Center for Special Separation Membrane, College of Chemical Engineering, Nanjing Tech University

College of Chemical Engineering, Hunan Collaborative Innovation Center of New Chemical Technologies for Environmental Benignity and Efficient Resource Utilization, Xiangtan University

School of Chemistry and Chemical Engineering, Shanxi University

Shanxi Laslon Coating Company Limited

College of Chemistry, Chemical Engineering and Materials Science, Soochow University

⁰