Simulation and optimization of thermal parameter of sinter annular cooler based on enthalpy exergy of heat carrier

ZHANG Sheng; FENG Junsheng; DONG Hui

doi:10.11949/j.issn.0438-1157.20170406

您当前的位置：

首页 >

文章列表页 >

Simulation and optimization of thermal parameter of sinter annular cooler based on enthalpy exergy of heat carrier

更新时间：2025-12-10

- Simulation and optimization of thermal parameter of sinter annular cooler based on enthalpy exergy of heat carrier
- CIESC Journal Issue 11, Pages: 4129-4136(2017)
- 作者机构：
  
  东北大学国家环境保护生态工业重点实验室,辽宁,沈阳,110819
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20170406
  CLC： F046.4TK11+5
- Online First：05 November 2017，
  
  Published：05 November 2017
- 稿件说明：
移动端阅览
ZHANG Sheng, FENG Junsheng, DONG Hui. Simulation and optimization of thermal parameter of sinter annular cooler based on enthalpy exergy of heat carrier[J]. CIESC Journal, 2017, (11): 4129-4136.
DOI：

ZHANG Sheng, FENG Junsheng, DONG Hui. Simulation and optimization of thermal parameter of sinter annular cooler based on enthalpy exergy of heat carrier[J]. CIESC Journal, 2017, (11): 4129-4136. DOI： 10.11949/j.issn.0438-1157.20170406.

摘要

以某冷却面积为405 m2的环冷机为研究对象，基于多孔介质和局部非热力学平衡理论，建立了环冷机二维稳态数值计算模型。借助COMSOL软件的自定义函数功能，将环冷台车沿运行方向的移动速度定义到数值模型中，研究并分析影响烧结矿余热回收的主要因素及其影响规律。以环冷机出口冷却空气的焓(火用）作为参数优化指标，并采用正交试验设计方法，得出环冷机一二段适宜的操作参数组合。结果表明：当其他操作参数不变时，随着入口风速的增加，出口冷却空气所携带的焓(火用）呈现先增大后减小的趋势。环冷机一二段适宜的操作参数为：冷却空气进口标况流量8.3×105 m3·h-1、料层高度1.6 m和进口风温424 K，此工况下出口热载体焓(火用）值比现有实际工况的提高了11.09%。

Abstract

With a 405 m2 annular sinter cooler as research objects

the two-dimensional steady-state numerical model of annular sinter cooler was established on the basis of the porous media and local non-equilibrium thermodynamics theory. The moving speed along with the moving direction of sinter trolley was defined into the numerical model with the help of user-defined functions in COMSOL. The main factors influencing the sinter waste heat recovery and influence laws were analyzed. The enthalpy exergy of outlet cooling air of annular sinter cooler was taken as the evaluation index of parameter optimization

and the suitable operating parameters combination of first and second stages in annular sinter cooler were obtained through the method of orthogonal experiment. The results show that when the other operating parameters are constant

the enthalpy exergy of outlet cooling air first increases and then decreases with the increase of inlet air velocity. The suitable operating parameters are as follows. The standard flow of inlet cooling air is 8.3×105 m3·h-1. The height of sinter bed layer is 1.6 m and the temperature of inlet cooling air is 424 K. Under this condition

the exergy of outlet heat carrier increases by 11.09% than existing working condition.

关键词

Keywords

references

Views

139

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical simulation and analysis of lithium-ion battery heat pipe cooling module based on orthogonal analytic hierarchy process

A multiscale approach for the thermo-mechanical coupling analysis of parallel-flow PCHE core

Simulation research on the boiling heat transfer characteristics of liquid sodium under microgravity

Improvement and numerical validation of quasi-steady-state frosting model based on thermal and mass transfer effect

Characteristics of non-uniform wind velocity distribution in window air conditioner axial fans and their impact on optimizing condenser circuit optimization

Related Author

Sheng TIAN

Jiajiang XIAO

WANG Hao

CAI Lujun

BAI Fan

ZHANG Feng

ZENG Yufeng

HE Yurong

Related Institution

School of Civil Engineering and Transportation, South China University of Technology

School of Science, Wuhan University of Science and Technology

Hubei Province Key Laboratory of Systems Science in Metallurgical Process

Hubei Key Laboratory for Engineering Structural Analysis and Safety Assessment

School of Mechanical Engineering, Wuhan University of Science and Technology

⁰