YU Yang, LIU Peiqi, WANG Yunlei, et al. Flow and thermodynamic properties of efficient gas wave refrigeration plant[J]. CIESC Journal, 2017, (8): 3039-3048.
DOI:
YU Yang, LIU Peiqi, WANG Yunlei, et al. Flow and thermodynamic properties of efficient gas wave refrigeration plant[J]. CIESC Journal, 2017, (8): 3039-3048.DOI: 10.11949/j.issn.0438-1157.20170267.
Flow and thermodynamic properties of efficient gas wave refrigeration plant
the efficient gas wave condensation graph was established. To optimize the gas wave condensation graph and estimate the internal structure parameters of the device
the two-dimensional periodic boundary model was adapted and the ideal gas as the medium was used to numerical simulate the flow and temperature field of the efficient gas wave condensation separator. The thermodynamic model of condensing system was established and its thermodynamic properties were analyzed. At the same time
the experimental platform was built
and the main parameters of the device were studied. The experimental results shows:by using the shock wave to recycle the pressure energy of the high pressure admission
the pressure energy of the drying gas can be highly recovered. By recycling the cooling capacity of the drying gas and pre-cooling the next high pressure admission circulation
the lower condensation temperature can be obtained. The refrigeration efficiency of this device exists the single-valued optimal point. The internal expansion efficiency of efficient gas wave condensation is about 63% and the maximum of the drying gas pressure can be recovered to 90%
which decreases with the increase of the pressure ratio.
Improved designs of negative Poisson’s ratio structure and their applications in aerospace engineering
Simulation of intra-cavity distribution mixing under the action of enhanced triangular rotor of twin-screw extruder
Numerical simulation of two-phase steam ejector applied in novel loop heat pipe
Calculation and analysis of soil source heat pumps intermittent heating operation time
Leakage rate analysis and dimple shape design of mechanical seal with oriented dimples based on multi-wedge phenomenon
Related Author
ZHUANG Shengyi
LI Chengwei
XIANG Wenchao
XU Junbo
YANG Chao
XU Baiping
LIANG Ruifeng
YU Huiwen
Related Institution
State Key Laboratory of Petroleum Molecular & Process Engineering, CAS Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences
School of Chemical Engineering, University of Chinese Academy of Science
Jiangmen Key Laboratory of Intelligent Manufacturing of Polymer Materials, Wuyi University
Advanced Research Center for Polymer Processing Engineering of Guangdong Province, Guangdong Industry Polytechnic
Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, Xi’an Jiaotong University