Numerical simulation and optimization of circulation cup in direct coal liquefaction reactor

ZHANG Chuanjiang; HAN Laixi; JIANG Xuedong; XU Ming; MEN Zhuowu

doi:10.11949/j.issn.0438-1157.20170195

您当前的位置：

首页 >

文章列表页 >

Numerical simulation and optimization of circulation cup in direct coal liquefaction reactor

更新时间：2025-12-10

- Numerical simulation and optimization of circulation cup in direct coal liquefaction reactor
- CIESC Journal Issue 7, Pages: 2703-2712(2017)
- 作者机构：
  
  1. 神华集团有限责任公司中国神华煤制油化工有限公司,北京,100011
  2. 中国神华煤制油化工有限公司鄂尔多斯煤制油分公司,内蒙古,鄂尔多斯,017029
  3. 北京低碳清洁能源研究所,北京,102209
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20170195
  CLC： Q021.1
- Online First：05 July 2017，
  
  Published：05 July 2017
- 稿件说明：
移动端阅览
ZHANG Chuanjiang, HAN Laixi, JIANG Xuedong, et al. Numerical simulation and optimization of circulation cup in direct coal liquefaction reactor[J]. CIESC Journal, 2017, (7): 2703-2712.
DOI：

ZHANG Chuanjiang, HAN Laixi, JIANG Xuedong, et al. Numerical simulation and optimization of circulation cup in direct coal liquefaction reactor[J]. CIESC Journal, 2017, (7): 2703-2712. DOI： 10.11949/j.issn.0438-1157.20170195.

摘要

针对煤直接液化反应器中的结焦问题，建立了多相流模型模拟了反应器内循环杯局部气-油煤浆两相的流动行为，得到了相含率等流体力学参数的空间分布情况。模拟结果表明，气液分离导致的泡沫聚并破碎以及雾沫夹带是形成结渣/结焦的主要原因。模拟研究了循环杯内堵塞程度与下降管中气含率的关系，表明随堵塞程度的提高，下降管中的气含率从0增加到34%，从而造成循环泵抽空。基于对结焦原因的分析，提出了优化的循环杯结构并进行了模拟分析。结果表明，改进后的循环杯结构可以有效强化气液分离，在极限条件下下降管中的气含率为14%，可以保证装置的稳定运行，为工业装置的改造提供了参考。

Abstract

To solve blockage caused by coking in direct coal liquefaction reactors

a multi-phase model was developed to simulate two-phase gas-slurry flows around the circulation cup

which spatial flow parameters such as gas holdup were obtained. The simulation results indicated that the main driver for deposition and coking was aggregation and break-up of foams as well as foam mist blending associated with gas-liquid separation process. The relationship between extent of blocking in the circulation cup and gas holdup in downcomer showed that gas holdup in the downcomer was increased from zero to 34% as the extent of blocking was increased

leading to pump depletion. The finding on the cause of coking allowed further optimization on circulation cup structure. Simulation results showed that optimized design of circulation cup could effectively enhance gas-liquid separation with 14% gas holdup in the downcomer at extreme conditions and thus maintained stable operation. This work provides a reference for modifications on industrial equipment.

关键词

Keywords

references

Views

198

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on impact of impurities in coal chemical waste salt on solvation of NaCl and Na2SO4

Enhanced sodium-ion multilayer adsorption performance of sulfur-functionalized M2N-type Mxene

Life cycle carbon emission and environment assessment of pre-combustion IGCC power plant

Validation of the generalized coarse-graining model in multi-particle simulations

Study on physical property model and enrichment process of trioxane system

Related Author

CHENG Wenting

WANG Enqi

CHENG Fangqin

CAO Yu

DU Xinyu

GAO Ang

LIANG Kang

CAI Yongmao

Related Institution

Institute of Resourees and Environental Engineering, Shanxi University

National Engineering Research Center of Solid Waste Resource Recovery

Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technologies (Northeast Electric Power University), Ministry of Education

School of Electrical Engineering, Northeast Electric Power University

School of Science, Northeast Electric Power University

⁰