Efficient and stable hydrogenation of dimethyl oxalate via copper-nickel catalysts

WANG Denghao; ZHANG Chuancai; ZHU Mingyuan; YU Feng; DAI Bin

doi:10.11949/j.issn.0438-1157.20170010

您当前的位置：

首页 >

文章列表页 >

Efficient and stable hydrogenation of dimethyl oxalate via copper-nickel catalysts

更新时间：2025-12-10

- Efficient and stable hydrogenation of dimethyl oxalate via copper-nickel catalysts
- CIESC Journal Issue 7, Pages: 2739-2745(2017)
- 作者机构：
  
  1. 石河子大学化学化工学院,新疆,石河子,832003
  2. 新疆兵团化工绿色过程重点实验室,新疆,石河子,832003
  3. 天津大学化学化工学院,天津,300072
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20170010
  CLC： Q426.82O643.36
- Online First：05 July 2017，
  
  Published：05 July 2017
- 稿件说明：
移动端阅览
WANG Denghao, ZHANG Chuancai, ZHU Mingyuan, et al. Efficient and stable hydrogenation of dimethyl oxalate via copper-nickel catalysts[J]. CIESC Journal, 2017, (7): 2739-2745.
DOI：

WANG Denghao, ZHANG Chuancai, ZHU Mingyuan, et al. Efficient and stable hydrogenation of dimethyl oxalate via copper-nickel catalysts[J]. CIESC Journal, 2017, (7): 2739-2745. DOI： 10.11949/j.issn.0438-1157.20170010.

摘要

为了探索高效、稳定的草酸二甲酯（DMO）加氢制乙醇酸甲酯（MG）催化剂，采用水热合成法制备Cu-Ni/SiO2催化剂，探索了不同Cu：Ni摩尔比对于催化剂活性的影响。通过XRD、TEM和XPS等表征，结果表明：利用二氧化硅微球作载体，铜镍物种的分散更加均匀。并且调变不同的Cu：Ni摩尔比，对Cu+在催化剂中的比例有一定的影响，从而影响乙醇酸甲酯的收率。在氢酯比为150、反应压力2 MPa、反应温度200℃和液时空速为0.5 h-1的反应条件下，Cu：Ni摩尔比为1：1时的催化剂Cu1Ni1/SiO2表现出了最好的催化性能，草酸二甲酯的转化率达到90%，乙醇酸甲酯的选择性达到了80%，催化剂能稳定运行100 h。上述结果可为研制催化活性高、选择性强、寿命长、易于生产乙醇酸甲酯的催化剂提供一定的参考。

Abstract

In order to explore the efficient and stable catalysts hydrogenation of dimethyl oxalate (DMO) to methyl glycolate (MG)

the Cu-Ni/SiO2 catalysts was prepared by hydrothermal synthesis method. The effect of different Cu and Ni mole ratio on catalytic activity was studied. By XRD

TEM and XPS characterization

the results show that the dispersion of copper and nickel species is more uniform by using silica microspheres as carriers. The ratio of Cu+ in the catalysts has certain influence on the yield of methyl glycolate. The reaction conditions are as follows: the hydrogen ester mole ratio 150

reaction pressure 2 MPa

reaction temperature 200℃ and the liquid space velocity 0.5 h-1. The Cu1Ni1/SiO2 catalyst showed the best catalytic performance

the conversion of dimethyl oxalate reached 90%

and the selectivity of methyl glycolate reached 80%

which has stable operation for 100 h. Above results can provide some references for the development of high catalytic activity

high selectivity

long service life and easy production of methyl glycolate.

关键词

Keywords

references

Views

312

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of liquid-phase reduction temperature on performance of silver-silica catalysts for hydrogenation of dimethyl oxalate to methyl glycolate

Effect of ammonia evaporation time on the reaction performance of hydrogenation of dimethyl oxalate to ethylene glycol over Cu/SiO2

Mechanistic insights into the hydrogenation of dimethyl oxalate to methyl glycolate over Ni-Ag/SiO2 catalyst

Study on the catalytic hydrogenation of maleic anhydride by mesoporous carbon-supported Ni catalyst

Performance of alkali metal-loaded SrMnO3 oxygen carriers in chemical looping oxidative dehydrogenation of ethylbenzene

Related Author

Guilin DONG

Zuwei LUO

Yueqiang CAO

Jinghong ZHOU

Wei LI

Xinggui ZHOU

FANG Song

XIE Dongmin

Related Institution

School of Chemical Engineering, East China University of Science and Technology

State Key Laboratory of Chemical Engineering, East China University of Science and Technology

School of Chemistry and Chemical Engineering, Guangxi University

Guangxi Huayi Energy Chemical Co., Ltd.

Institute of Green Petroleum Processing and Light Hydrocarbon Conversion, College of Chemical Engineering, Zhejiang University of Technology

⁰