CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer

LIU Baoqing; ZHENG Yijun; LIANG Huili; WANG Manman; JIN Zhijiang

doi:10.11949/j.issn.0438-1157.20161749

您当前的位置：

首页 >

文章列表页 >

CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer

更新时间：2025-12-10

- CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer
- CIESC Journal Issue 6, Pages: 2280-2289(2017)
- 作者机构：
  
  1. 浙江大学化工机械研究所,浙江,杭州,310027
  2. 浙江诚泰化工机械有限公司,浙江,湖州,311258
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20161749
  CLC： Q051.7
- Online First：05 June 2017，
  
  Published：05 June 2017
- 稿件说明：
移动端阅览
LIU Baoqing, ZHENG Yijun, LIANG Huili, et al. CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer[J]. CIESC Journal, 2017, (6): 2280-2289.
DOI：

LIU Baoqing, ZHENG Yijun, LIANG Huili, et al. CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer[J]. CIESC Journal, 2017, (6): 2280-2289. DOI： 10.11949/j.issn.0438-1157.20161749.

摘要

气液搅拌设备因其良好的适用性被广泛应用于过程工业中。为更好地比较不同工况下剪切变稀体系中的气液分散情况，通过实验研究整体气含率和相对功耗确定适宜的转动模式，进而模拟研究表观气速、体系黏度、搅拌转速对气含率和气泡尺寸的影响。结果表明，相同功率下内外双桨反向旋转模式在理想气液分散条件下，相较于单轴内桨和内外双桨同向旋转模式具有更高的气含率和更好的气体泵送能力；表观气速的增加有利于气泡的均匀分散，但气泡尺寸也会随之增大；有效黏度的增加使得搅拌桨的影响区域变小，不利于气泡的均匀分散，气泡尺寸也随之增大；搅拌转速的增加使得循环涡流的影响区域变大，高气含率区不断扩大。

Abstract

Gas-liquid mixing equipment has broad industrial applications for its good performance in gas dispersion with increased contact area between gas and liquid phases. In order to understand gas-liquid dispersion in industrial process of shear-thinning liquid system under different working conditions

appropriate rotation mode was first determined experimentally by studying overall gas holdup and relative power demand and effect of apparent gas velocity

system viscosity

and stirring speed on gas holdup and bubble size was then investigated by population balance and multiple size group model simulation. Results showed that

coaxial mixer in contra-rotation mode had larger overall gas holdup and better gas pumping capacity than mixer with single inner impeller or coaxial mixer in co-rotation mode at conditions of ideal gas-liquid dispersion and same power consumption. Increasing apparent gas velocity forced more homogeneous gas holdup and larger bubble size. Increasing system viscosity reduced impeller affecting zone and homogeneity of gas holdup but increased bubble size. Increasing stirring speed enlarged affecting area of circular vortex and extended high gas holdup area.

关键词

Keywords

references

Views

277

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Characteristics research of the charge-hold-vent method for cryogenic propellant tank chilldown in microgravity

Numerical study on flow boiling heat transfer in asymmetric serrated microchannel structures

Numerical simulation study on the leakage diffusion characteristics and safety monitoring of liquid hydrogen in hydrogen refueling stations

Research on two-phase flow and heat transfer characteristics in precooling process of low-temperature pipelines based on one-dimensional drift-flux model

Numerical study on influence of perforated plate on retention performance of liquid oxygen tank under negative gravity

Related Author

ZHANG Rongda

MA Yuan

WANG Yunlong

WANG Kang

LI Yanzhong

XU Langtao

CUI Shuo

TANG Dawei

Related Institution

Department of Refrigeration and Cryogenic Engineering, Xi’an Jiaotong University

School of Energy and Power Engineering, Dalian University of Technology

School of Safety Science and Engineering, Changzhou University

China Academy of Launch Vehicle Technology Research and Development Center

Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University

⁰