Demulsification of W/O emulsion with three-dimensional electric spiral plate-type microchannel

PU Yadong; RUAN Da; DILIYAER·Hamiti; ZHAO Zhigang; CHEN Xiao

doi:10.11949/j.issn.0438-1157.20161732

您当前的位置：

首页 >

文章列表页 >

Demulsification of W/O emulsion with three-dimensional electric spiral plate-type microchannel

更新时间：2025-12-10

- Demulsification of W/O emulsion with three-dimensional electric spiral plate-type microchannel
- CIESC Journal Issue 7, Pages: 2790-2797(2017)
- 作者机构：
  
  西南民族大学化学与环境保护工程学院,四川,成都,610041
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20161732
  CLC： Q028.8
- Online First：05 July 2017，
  
  Published：05 July 2017
- 稿件说明：
移动端阅览
PU Yadong, RUAN Da, DILIYAER·Hamiti, et al. Demulsification of W/O emulsion with three-dimensional electric spiral plate-type microchannel[J]. CIESC Journal, 2017, (7): 2790-2797.
DOI：

PU Yadong, RUAN Da, DILIYAER·Hamiti, et al. Demulsification of W/O emulsion with three-dimensional electric spiral plate-type microchannel[J]. CIESC Journal, 2017, (7): 2790-2797. DOI： 10.11949/j.issn.0438-1157.20161732.

摘要

首次设计并加工了一套加电三维螺旋板式微通道装置，微通道由具有双亲性的铜片与亲油性的聚四氟乙烯（PTFE）片构成，该装置利用电破乳与微通道破乳的双重耦合作用，可以实现微通道对W/O型乳状液的高效破乳过程。实验研究了该通道对W/O型乳状液的破乳效果，主要考察了微通道高度、微通道片数、微通道螺旋角度、直流电场强度以及乳状液流速等因素对破乳率的影响。实验结果表明：减小通道高度、增加通道长度、提高电场强度有助于提升微通道的破乳率；当微通道高度为110 μm、直流电场强度为250 V·cm-1、微通道角度为180°、微通道片数为5片、流速为2 ml·min-1时乳状液单次通过微通道的破乳率可以达到68%。实验结果表明加电三维螺旋微通道对W/O型乳状液的破乳过程具有过程强化作用。

Abstract

A set of three-dimensional electric spiral plate-type microchannels (3D-ESPM) was designed and fabricated for the first time. The microchannel is comprised of amphiphilic copper plates and lipophilic polytetrafluoroethylene (PTFE) plates. By coupling electric demulsification and microfluidic demulsification

the microchannel can efficiently demulsify a W/O emulsion. Factors influencing the demulsification of W/O emulsion using 3D-ESPM were systematically investigated

including the height of the microchannel

the number of microchannel plates

the spiral angle of the microchannel

the electric field intensity and the flow rate of the emulsion. The results showed that demulsification efficiency increases with increasing electric field intensity

decreasing microchannel height

and increasing microchannel length. The maximum demulsification efficiency of W/O emulsion in a single pass through the 3D-ESPM reached 68% with a microchannel height of 110 μm

electric field intensity of 250 V·cm-1

microchannel angle of 180°

microchannel number of 5

and flow rate of 2 ml·min-1. The results showed that 3D-ESPM can intensify the demulsification of W/O emulsion.

关键词

Keywords

references

Views

202

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on demulsification of O/W emulsion by spiral plate microchannel with ultra-large aspect ratio

Experimental study on krypton isotope separation using microchannel cryogenic distillation system

Research progress of ionic liquids in separation of aromatics/alkanes and olefins/alkanes

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

A hybrid modeling and optimization strategy for sequential simulated moving bed

Related Author

Zhengdong MA

Meixiu WEI

Qilin LU

DILIYAER∙Hamiti

Xiao CHEN

XU Yifan

WANG Shibo

JU Yonglin

Related Institution

Key Laboratory of Basic Chemistry, State Ethnic Affairs Commission, College of Chemistry & Environment, Southwest Minzu University

Microfluidic Synthesis and Separation Laboratory, College of Chemistry & Environment, Southwest Minzu University

School of Mechanical and Engineering, Shanghai Jiao Tong University

School of Physics and Astronomy, Shanghai Jiao Tong University

Research Institute of Carbon Neutrality, Shanghai Jiao Tong University

⁰