Numerical analysis on step cooling process of phase change material

HU Huoyan; JIN Xing; ZHANG Xiaosong

doi:10.11949/j.issn.0438-1157.20161409

您当前的位置：

首页 >

文章列表页 >

Numerical analysis on step cooling process of phase change material

更新时间：2025-11-26

- Numerical analysis on step cooling process of phase change material
- CIESC Journal Issue S2, Pages: 394-400(2016)
- 作者机构：
  
  1. 东南大学能源与环境学院,江苏,南京,210096
  2. 东南大学建筑学院,江苏,南京,210096
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20161409
  CLC： K11
- Online First：30 December 2016，
  
  Published：30 December 2016
- 稿件说明：
移动端阅览
HU Huoyan, JIN Xing, ZHANG Xiaosong. Numerical analysis on step cooling process of phase change material[J]. CIESC Journal, 2016, (S2): 394-400.
DOI：

HU Huoyan, JIN Xing, ZHANG Xiaosong. Numerical analysis on step cooling process of phase change material[J]. CIESC Journal, 2016, (S2): 394-400. DOI： 10.11949/j.issn.0438-1157.20161409.

摘要

大部分的相变材料都具有一定的过冷度，这限制了相变材料的广泛应用。充分了解相变材料在凝固过程中的温度变化情况对于相变材料性能分析具有重要意义。基于集中参数法和等效比热容法建立了相变材料步冷过程温度变化模型，并通过实验验证了该模型。同时运用模型研究了相变材料过冷度与有效潜热值对其凝固过程中温度变化的影响并得出结论：相变材料开始凝固的时间与相变持续时间均与其过冷度呈指数关系；相变材料开始凝固的时间随着过冷度的增大而增长，相变持续时间随着过冷度的增大而缩短；相变材料开始凝固的时间与其有效潜热大小没有关系，而相变持续时间与其有效潜热值呈明显的线性正比关系。

Abstract

Most phase change materials have the problem of supercooling

which affects the wide use of phase change materials.Therefore

it is very important to figure out the temperature variations during the solidifying process of phase change material.The numerical model of step cooling process of phase change material was built based on the lumped parameter method and the effective heat capacity method

and the model was verified by the experimental results.Meanwhile

the influences of the supercooling degree and the amount of latent heat of the phase change material on its temperature during the solidifying process were studied.It was found that the starting solidifying time of the phase change material and the total time of solidifying process both had the exponential relationship with the supercooling degree.The starting solidifying time was delayed with the increase of the supercooling degree

and the total time of solidifying process was decreased with the increase of the supercooling degree.The amount of latent heat had no influence on the starting solidifying time

but there was a linear relationship between the amount of latent heat and the total time of solidifying process.

关键词

Keywords

references

Views

224

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on performance enhancement and cold retention characteristics of solid packed bed cold energy storage

Calibration method and experimental validation for resolving inverse heat conduction problem with constant temperature on back surface

Experimental study on influence of inner tube movement on charging-discharging performance in horizontal shell-and-tube phase change thermal energy storage exchanger

Analysis and verification of calculation model of heat transfer coefficient of twin screw in the same direction

Experimental study on heat and mass transfer performance of elliptical tube-fin evaporative condenser

Related Author

WANG Chenchen

ZHANG Jinya

SUN Na

ZENG Fubao

CHENG Ruiqin

CHEN Hongchu

WANG Shengjie

ZHOU Shaobin

Related Institution

School of Mechanical and Storage and Transportation Engineering, China University of Petroleum

College of Energy Engineering, Zhejiang University

School of Aeronautics and Astronautics, Zhejiang University

Shandong Engineering Research Center for High-efficiency Energy Storage and Hydrogen Energy Utilization, School of Nuclear Science, Energy and Power Engineering, Shandong University

Inner Mongolia Guolong Energy Management Co., Ltd.

⁰