Metrological characteristics of water-enthalpy method cooling capacity source

HANG Chenzhe; MA Guoyuan; XU Dinghua; XU Shuxue; ZHANG Haiyun; TENG Junheng

doi:10.11949/j.issn.0438-1157.20161375

您当前的位置：

首页 >

文章列表页 >

Metrological characteristics of water-enthalpy method cooling capacity source

更新时间：2025-11-26

- Metrological characteristics of water-enthalpy method cooling capacity source
- CIESC Journal Issue S2, Pages: 100-106(2016)
- 作者机构：
  
  1. 北京工业大学环境与能源工程学院,北京,100124
  2. 中国计量科学研究院新能源环境计量研究所,北京,100029
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20161375
  CLC： K039
- Online First：30 December 2016，
  
  Published：30 December 2016
- 稿件说明：
移动端阅览
HANG Chenzhe, MA Guoyuan, XU Dinghua, et al. Metrological characteristics of water-enthalpy method cooling capacity source[J]. CIESC Journal, 2016, (S2): 100-106.
DOI：

HANG Chenzhe, MA Guoyuan, XU Dinghua, et al. Metrological characteristics of water-enthalpy method cooling capacity source[J]. CIESC Journal, 2016, (S2): 100-106. DOI： 10.11949/j.issn.0438-1157.20161375.

摘要

水焓值法制冷量源能够应用于制冷量的量值传递，提供数值可测、可控的制冷量量值。首先提出了水焓值法制冷量源原理，并在该原理基础上设计和研制了制冷量源装置的物理结构。然后在空气焓值法实验室中对制冷量源进行了实验测量，由风机功率转化实验结果可知风机消耗功率完全转化为空气焓值的增加，并可通过焓差室测量。最后对制冷量源装置进行了稳定性研究和不确定度评定，由实验结果分析可知稳态运行30 min输出制冷量标准差为22.2 W（制冷量5251.9 W），相对扩展不确定度为0.6%（k=2）。水焓值法制冷量源装置第一次从计量学角度实现了制冷量量值的溯源，输出量值可溯源至温度、压力、流量和电功率。

Abstract

The water-enthalpy method cooling capacity source could be applied in the calibration of cooling capacity measuring apparatus. It could supply a cooling capacity which was measurable and controllable.First

the principle of water-enthalpy method was illustrated

then the physical structure of the source was designed and developed.After that

the source was experimentally investigated in an air enthalpy method test rooms

the results of the energy transformation of fan's electric power experiments showed that:the fan's electric power transformed into thermal energy totally and the energy could be measured by air enthalpy method test rooms.Finally

the stability experiment and the evaluation of uncertainty were conducted

the results showed that the outputted cooling capacity standard deviation of 30 min was 22.2 W (cooling capacity 5251.9 W) and the related expanded uncertainty was 0.6% (k=2).This source achieved the traceability of cooling capacity from the perspective of metrology for the first time

and the cooling capacity could be traced to temperature

pressure

flow rate and electric power.

关键词

Keywords

references

Views

123

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Adsorption measurement method based on flow calibration and its error analysis

Methods for measuring vaporization enthalpies of ionic liquids

Preparation of Zn-CuOx/MgO-SiO2 aerogel catalyst with strong electron transfer ability and its catalytic ozonation mechanism and toxicity evaluation on sulfamethoxazole

Deformation and fragmentation characteristics of liquid marbles under the action of non-uniform electric field

Research on the thermal physical properties and heat storage performance of FeCoNC carbon material-reinforced composite phase change materials

Related Author

Biqiang LIU

Haishan CAO

Sijie SONG

Jia YAO

Haoran LI

ZHANG Lanhe

SHI Bing

LIU Hui

Related Institution

Department of Energy and Power Engineering, School of Mechanical Engineering, Tsinghua University

Department of Chemistry, Zhejiang University

State Key Laboratory of Chemical Engineering, Department of Chemical and Biological Engineering, Zhejiang University

School of Chemical Engineering, Northeast Electric Power University

School of Hydraulic Engineering, Guangxi Vocational College of Water Resources and Electric Power

⁰