Flow following control strategy for thermal management of water-cooled PEMFC

CHEN Weirong; NIU Zhuo; HAN Zhe; LIU Youxian; LIU Zhixiang

doi:10.11949/j.issn.0438-1157.20161219

您当前的位置：

首页 >

文章列表页 >

Flow following control strategy for thermal management of water-cooled PEMFC

更新时间：2025-12-10

- Flow following control strategy for thermal management of water-cooled PEMFC
- CIESC Journal Issue 4, Pages: 1490-1498(2017)
- 作者机构：
  
  1. 西南交通大学电气工程学院,四川,成都,610031
  2. 佛山科学技术学院佛山(云浮)氢能产业与新材料发展研究院,广东,佛山,528000
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20161219
  CLC： M911.4
- Online First：05 April 2017，
  
  Published：05 April 2017
- 稿件说明：
移动端阅览
CHEN Weirong, NIU Zhuo, HAN Zhe, et al. Flow following control strategy for thermal management of water-cooled PEMFC[J]. CIESC Journal, 2017, (4): 1490-1498.
DOI：

CHEN Weirong, NIU Zhuo, HAN Zhe, et al. Flow following control strategy for thermal management of water-cooled PEMFC[J]. CIESC Journal, 2017, (4): 1490-1498. DOI： 10.11949/j.issn.0438-1157.20161219.

摘要

针对传统温度控制策略在水冷型质子交换膜燃料电池（proton exchange membrane fuel cell，PEMFC）工作中水泵和散热器风扇存在的强耦合性，并为了提高电堆的工作性能和寿命，提出一种流量跟随电流的温度控制策略，根据电堆电流变化调节冷却水流量来控制电堆冷却水进出口温差，通过PID控制器调节散热风扇控制电堆入口温度。在水冷PEMFC热管理平台上对传统控制策略、流量跟随控制策略做了实验对比。结果表明，流量跟随电流控制策略使冷却水出口温度最大超调量减少64.3%，冷却水出入口温差最大偏差减少46.7%，调整时间平均缩短73 s，达到了较高的控制精度和响应速度，削弱了水泵和散热风扇的强耦合作用，流量跟随电流控制策略能够满足PEMFC系统对温度控制的要求。

Abstract

For the strong coupling problem that exists in the operation process of a water-cooled proton exchange membrane fuel cell (PEMFC) and to improve the performance and life of the PEMFC

a temperature control strategy for flow-following-current was proposed

this strategy regulates the coolant flow based on the current value thereby controls the temperature difference between the coolant inlet and outlet of a stack

the PID controller controls the inlet temperature of coolant by regulating the rotational speed of the radiator fan. Due to the different changes of current and power in the dynamic operation process of PEMFC

the system temperature changes in flow-following-current and power were needed to research respectively. Comparative experiments between the traditional control strategy and the flow following strategy were made on a test platform for the thermal management of the PEMFC. The results show that when compared with the traditional control strategy

the flow-following-current strategy could reduce the maximum overshoot of the coolant outlet temperature by 64.3% and decrease the maximum difference between the coolant inlet and outlet temperatures by 46.7%

the response time of system was reduced by 73 s at least. Besides the temperature changes were more stable in the flow-following-current compared to the flow-following-power. The flow-following-current strategy has realized a higher control precision and response speed

strong coupling between radiator fan and water pump can be effectively weakened

a short-term heating also can be avoided inside the stack when the current is greatly increased. The flow-following-current strategy can well meet the requirements on the temperature control of fuel cell systems.

关键词

Keywords

references

Views

340

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experiment of thin film thermal sensor based on vacuum coating technology

Control of fuel cell air supply system based on LPV model

Controlled synthesis of Bi2MoO6/MoO3 composite fibers via in-situ hydrothermal method and their high-efficiency photocatalytic hydrogen production performance

Optimal scheduling of power plant carbon capture system considering delay characteristics

Construction of a multi-physics coupling model for lithium-ion batteries based on strain response

Related Author

Xiao LUO

Hang GUO

Fang YE

Chongfang MA

SHEN Yeye

CHEN Xuelan

XIE Lei

LI Xiuliang

Related Institution

MOE Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Beijing Key Laboratory of Heat Transfer and Energy Conversion, College of Environmental and Energy Engineering, Beijing University of Technology

State Key Laboratory of Industrial Control Technology, Institute of Cyber-Systems and Control, Zhejiang University

Zhejiang Supcon Software Co., Ltd.

College of Chemistry and Materials Engineering, Hainan Vocational University of Science and Technology

College of Chemistry, Baicheng Normal University

⁰