Convection heat transfer characteristics of super-hydrophobic micro pin-fins with different cross-sectional shapes

ZHU Ye; GUAN Ning; LI Dong; ZHAO Xiaobao; LIU Zhigang

doi:10.11949/j.issn.0438-1157.20161079

您当前的位置：

首页 >

文章列表页 >

Convection heat transfer characteristics of super-hydrophobic micro pin-fins with different cross-sectional shapes

更新时间：2025-11-26

- Convection heat transfer characteristics of super-hydrophobic micro pin-fins with different cross-sectional shapes
- CIESC Journal Issue 1, Pages: 63-71(2017)
- 作者机构：
  
  1. 南京师范大学能源与机械工程学院, 江苏省能源系统过程转化与减排技术工程实验室,江苏,南京,210042
  2. 山东省科学院能源研究所流动与强化传热重点实验室,山东,济南,250014
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20161079
  CLC： K124
- Online First：05 January 2017，
  
  Published：05 January 2017
- 稿件说明：
移动端阅览
ZHU Ye, GUAN Ning, LI Dong, et al. Convection heat transfer characteristics of super-hydrophobic micro pin-fins with different cross-sectional shapes[J]. CIESC Journal, 2017, (1): 63-71.
DOI：

ZHU Ye, GUAN Ning, LI Dong, et al. Convection heat transfer characteristics of super-hydrophobic micro pin-fins with different cross-sectional shapes[J]. CIESC Journal, 2017, (1): 63-71. DOI： 10.11949/j.issn.0438-1157.20161079.

摘要

通过在圆形、菱形以及椭圆形微肋阵表面固化含有微纳米颗粒涂层制备超疏水微肋阵，并对不同截面形状超疏水微肋阵内流动与对流换热特性进行实验研究，测量得到了超疏水处理前后各截面形状微肋阵内流动阻力系数f以及Nusselt数。此外，通过计算超疏水微肋阵内的综合传热强化因子ε，定量分析了超疏水处理对不同截面形状微肋阵内流动与换热特性的综合影响。研究结果表明，超疏水处理后圆形、菱形、椭圆形微肋阵内摩擦阻力系数与未处理前相比最大可降低72%、66%、70%；同时，3种截面微肋阵内Nu有所降低，且疏水前后微肋阵Nu偏差随加热功率的增加逐渐减小，高加热功率下3种微肋阵超疏水处理前后Nu偏差最大分别不超过44%、17%、47%；高加热功率下超疏水菱形微肋阵在Re<1200范围内具有良好的综合传热强化性能，ε始终高于1.17。

Abstract

Super-hydrophobic micro pin-fins with circular

diamond and elliptical cross-sectional shapes were prepared by solidifying hydrophobic layers involved nano-particles on the flowing surfaces

and the flow resistance coefficient as well as Nusselt number in super-hydrophobic micro pin-fins was measured.The integrated effect of super-hydrophobic surface on resistance reduction and heat transfer enhancement was explored by analyzing the integrated heat transfer enhancement factor ε.The results indicated that the friction resistance coefficient was reduced at 72%

66% and 70% in three kinds of micro pin-fins with super-hydrophobic walls and different cross-sectional shapes.Besides

although Nu in all three kinds of micro pin-fins was reduced

the value of the decrease was less than 44%

17% and 47% under the high heating power in present research.In addition

the super-hydrophobic micro pin-fins with diamond cross-sectional shape had good comprehensive heat transfer enhancement performance under the high heating power

and the value of ε is higher than 1.17 in the range of Re<1200.

关键词

Keywords

references

Views

241

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical study of thermal characteristics of energy storage battery packs

Effect of lubricating oil on convective heat transfer characteristics of supercritical carbon dioxide

Energy transfer conversion mechanism and minimum entropy generation principle for convective heat transfer enhancement

Fluid flow and heat transfer performance in air flow across hollow fiber membrane tube bundles

Effects of deflector structure on performance of micro-channel evaporator with parallel flow

Related Author

CHENG Wendi

ZHANG Daquan

XU Wenjie

LI Minxia

GUO Qiang

LU Xiaoping

YU Shurong

YU Jianping

Related Institution

Jiangsu Megjuneng Technology Co.， Ltd.

Changzhou Haowan New Energy Technology Co., Ltd.

Key Laboratory of Efficient Utilization of Low and Medium Grade Energy(Tianjin University), Ministry of Education

College of Petrochemical Technology, Lanzhou University of Technology

华南理工大学化学与化工学院传热强化与过程节能教育部重点实验室

⁰