Synthesis of BTX by Pt/Y catalyzed hydrogenation of FCC diesel

ZHOU Likun; YU Haibin; GE Qingfeng; FAN Jingxin; PEI Renyan; ZANG Jiazhong; NAN Jun

doi:10.11949/j.issn.0438-1157.20160795

您当前的位置：

首页 >

文章列表页 >

Synthesis of BTX by Pt/Y catalyzed hydrogenation of FCC diesel

更新时间：2025-12-10

- Synthesis of BTX by Pt/Y catalyzed hydrogenation of FCC diesel
- CIESC Journal Issue 11, Pages: 4623-4633(2016)
- 作者机构：
  
  1. 中海油天津化工研究设计院有限公司,天津,300131
  2. 天津大学化工学院,天津,300072
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160795
  CLC： Q028.8
- Online First：05 November 2016，
  
  Published：05 November 2016
- 稿件说明：
移动端阅览
ZHOU Likun, YU Haibin, GE Qingfeng, et al. Synthesis of BTX by Pt/Y catalyzed hydrogenation of FCC diesel[J]. CIESC Journal, 2016, (11): 4623-4633.
DOI：

ZHOU Likun, YU Haibin, GE Qingfeng, et al. Synthesis of BTX by Pt/Y catalyzed hydrogenation of FCC diesel[J]. CIESC Journal, 2016, (11): 4623-4633. DOI： 10.11949/j.issn.0438-1157.20160795.

摘要

利用Pt/Y催化剂，在固定床反应器中，温度380℃、压力3 MPa、氢油体积比1000及质量空速1.0 h-1条件下，分别采用加氢处理的全馏分和轻馏分催柴为原料制备苯、甲苯和二甲苯（BTX），获得（C6+C7+C8）芳烃的总选择性分别为9.4%和33.9%。对原料和液体产物进行的气相色谱和质谱分析表明，BTX主要经过重芳烃的加氢饱和、裂解等反应生成，中间物质为烷基苯、四氢萘、茚满及茚类等单环芳烃。通过对反应原料以及对反应前后催化剂的N2吸脱附、NH3-TPD、XRD衍射图谱、TG等物化性质的表征，分析催化剂失活的主要原因。即全馏分催柴原料中高含量的S、N化合物快速吸附造成了催化剂中毒，而轻馏分原料中S、N化合物在催化剂表面的缓慢积累覆盖活性位，造成催化剂逐渐失活。

Abstract

BTX was prepared by Pt/Y catalyzed hydrogenation of the whole or light fraction of hydrogenated FCC diesel in fixed bed reactor at reaction condition of temperature at 380℃

pressure at 3 MPa

volume ratio of V(H2) over V(feed) at 1000

and WHSV at 1.0 h-1. The overall selectivity of (C6+C7+C8) arenes was 9.4% and 33.9% for the whole and light fraction of the hydrotreated FCC diesel

respectively. GC-MS study on feeds and liquid products showed that BTX were mainly produced through hydrogenation saturation and cracking of heavy arenes along with intermediate products of mononuclear aromatics such as alkylbenzenes

indane

tetralin

and indenes. By analysis of feeds

fresh and used catalysts via N2-physisorption

NH3-TPD

XRD

and TG

it was found that adsorption of high sulfur- and nitrogen- compounds in the whole fraction of FCC diesel quickly lead to catalyst toxication whereas slow accumulation and active site coverage on catalyst surface by sulfur- and nitrogen- compounds in the light fraction of FCC diesel gradually lead to catalyst deactivation.

关键词

Keywords

references

Views

250

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

High-performance electrocatalytic semi-hydrogenation of acetylene to ethylene via MOF derived Cu/N-C catalyst

Effect of ammonia evaporation time on the reaction performance of hydrogenation of dimethyl oxalate to ethylene glycol over Cu/SiO2

Integrated production of 2-methyltetrahydrofuran through hydrogenation and dehydration of ethyl levulinate

Study on synergistic catalysis by highly dispersed dual-site Co species for CO2-oxidative dehydrogenation of ethane to ethylene

Study on the catalytic hydrogenation of maleic anhydride by mesoporous carbon-supported Ni catalyst

Related Author

DU Zifu

XIE Xiaomi

ZHANG Mimi

LI Zuosi

WU Deyin

ZHOU Jianzhang

LI Rui

JIAN Xuan

Related Institution

Shaanxi Key Laboratory of Chemical Reaction Engineering, School of Chemistry and Chemical Engineering, Yan’an University, Yan’an

National Key Laboratory of Surface-Interface Chemistry, School of Chemistry and Chemical Engineering, Xiamen University

Key Laboratory of Atmospheric Complex Pollution Control and Synergistic Carbon Reduction of Shanxi Province, School of Environmental Science and Engineering, Taiyuan University of Technology

School of Chemistry and Chemical Engineering, Guangxi University

Guangxi Huayi Energy Chemical Co., Ltd.

⁰