Effect of concentration of NH<sub>4</sub>Cl solution on corrosion behavior of Incoloy 825 alloy

ZHU Min; YUAN Yongfeng; YE Huahui; CHEN Shaoqi; XI Junkai; ZHU Shunfeng

doi:10.11949/j.issn.0438-1157.20160652

您当前的位置：

首页 >

文章列表页 >

Effect of concentration of NH₄Cl solution on corrosion behavior of Incoloy 825 alloy

更新时间：2025-11-26

- Effect of concentration of NH₄Cl solution on corrosion behavior of Incoloy 825 alloy
- CIESC Journal Issue S2, Pages: 255-261(2016)
- 作者机构：
  
  1. 浙江理工大学机械与自动控制学院,浙江,杭州,310018
  2. 杭州锅炉集团股份有限公司,浙江,杭州,310021
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160652
  CLC： G174.2
- Online First：30 December 2016，
  
  Published：30 December 2016
- 稿件说明：
移动端阅览
ZHU Min, YUAN Yongfeng, YE Huahui, et al. Effect of concentration of NH₄Cl solution on corrosion behavior of Incoloy 825 alloy[J]. CIESC Journal, 2016, (S2): 255-261. DOI: 10.11949/j.issn.0438-1157.20160652.
DOI：

ZHU Min, YUAN Yongfeng, YE Huahui, et al. Effect of concentration of NH₄Cl solution on corrosion behavior of Incoloy 825 alloy[J]. CIESC Journal, 2016, (S2): 255-261. DOI: 10.11949/j.issn.0438-1157.20160652. DOI：

摘要

通过电化学阻抗技术、极化曲线和浸泡腐蚀实验对Incoloy 825合金在不同浓度NH4Cl溶液中的腐蚀行为进行了研究。研究结果表明：开路电位随着浓度的升高而负移，腐蚀倾向增大；采用等效电路RS（Q1R1）（QdlRt）对电化学阻抗谱进行拟合，电荷转移电阻Rt随浓度增加而减小，Incoloy 825合金的维钝电流密度和腐蚀速率随浓度的增加而增大；825合金的腐蚀形貌主要为局部腐蚀，点蚀的密集度和大小随浓度的增加而增大；EDS结果表明Cl-参与了电化学反应过程。

Abstract

The corrosion behavior of Incoloy 825 alloy was investigated in the different concentration of NH4Cl solution by electrochemical impedance spectroscopy(EIS)

polarization curve measurement and immersion corrosion test.The results show that the open circuit potential shifts negatively with the increase of concentration of NH4Cl solution

i.e.

the corrosion tendency increases.The equivalent circuit of RS(Q1R1)(QdlRt)is used to fit the electrochemical impedance spectra.The EIS result reveals that the charge transfer resistance Rt decreases with the increasing of NH4Cl solution concentration

meanwhile the passive current density and corrosion rate of Incoloy 825 alloy increases.The corrosion morphologies of the alloy are mainly localized corrosion

the intensity and size of pits increase with the increase of solution concentration.The results of EDS show that Cl-involves in the electrochemical reaction process.

关键词

Keywords

references

Views

263

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Protection performance of Mg-rich coatings formed by different epoxyresins on AZ91D alloys

Study on the protective behavior of heavy-duty anti-corrosive coatings/TA2 in simulated ultra-deep sea 10000 meters environment

Adsorption and energy storage properties of electrolyte ions on nanorippled graphene surfaces

Research progress on the H+/Zn2+ interfacial transport regulation and reaction mechanisms in aqueous Zn/MnO2 system

Preparation and properties of superhydrophobic aluminum alloy via chemical-electrochemical synergistic etching

Related Author

LU Xiangyu

WU Jingying

ZUO Yu

ZHENG Chuanbo

ZHANG Heqi

LU Weizhong

LI Guohua

WANG Hongfei

Related Institution

School of Materials Science and Engineering, Jiangsu University of Science and Technology

Material Corrosion and Protection Key Laboratory of Sichuan Province

School of Materials Science and Engineering, Beijing University of Chemical and Technology

College of Chemical Engineering, Zhejiang University of Technology

State Key Laboratory of Marine Critical Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences

⁰

Effect of concentration of NH4Cl solution on corrosion behavior of Incoloy 825 alloy

DOI：10.11949/j.issn.0438-1157.20160652

摘要

Abstract

关键词

Keywords

references

Effect of concentration of NH₄Cl solution on corrosion behavior of Incoloy 825 alloy