Phase change materials(PCMs) is the basis of the research of phase change heat storage technology. Aimed at the low thermal conductivity of common phase change material-paraffin
nano particles addition technology was used to enhance the heat transfer performance of paraffin
so the thermal conductivity and thermal diffusion coefficient of paraffin were improved. Through melting test of nano particle-paraffin and observation of settling process of nano particles
Cu nanoparticle and dispersing agent Hitenol BC-10 were selected to prepare a kind of stable nano-particle/paraffin composite phase change storage material
and its thermal physical properties were tested. The experimental results showed that addition of nano-copper particles could increase the thermal conductivity of paraffin apparently. Compared with the pure paraffin
thermal conductivity of solid nano-copper/paraffin increased by 7.9%
the liquid nano-copper/paraffin increased by 3.8%
while the solid and liquid thermal diffusion coefficient increased by 20.6% and 16% respectively.
Performance of MgAl layered double hydroxides light stabilizer assembled via intermolecular forces
Facile synthesis of MWCNT/SiO2 nano-composites as high-performance oil adsorbents
Preparation of modified multiwalled carbon nanotubes/chitosan composites and their antifouling properties
Preparation and thermal properties of nano-organic composite phase change materials for cool storage in air-conditioning
Thermodynamic performance of tower-type solar-assisted supercritical compression CO2 energy storage system
Related Author
Dongdong DU
Huang LIU
Ruoyu MA
Yongjun FENG
Dianqing LI
Pinggui TANG
HUANG Jiankun
LIU Hui'e
Related Institution
State Key Laboratory of Chemical Resource Engineering, Beijing Engineering Center for Hierarchical Catalysts, Beijing University of Chemical Technology
State Key Laboratory of Heavy Oil Processing, China University of Petroleum
Institute of Materials Science and Engineering, Ocean University of China
Institute of Refrigeration and Cryogenic Engineering, University of Shanghai for Science and Technology
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, School of Materials Science & Engineering, Wuhan Institute of Technology