Influences of primary nozzle diameter on steam ejector performance

FU Weina; LIU Zhongliang; LI Yanxia; WU Hongqiang; TANG Yongzhi

doi:10.11949/j.issn.0438-1157.20160561

您当前的位置：

首页 >

文章列表页 >

Influences of primary nozzle diameter on steam ejector performance

更新时间：2025-12-10

- Influences of primary nozzle diameter on steam ejector performance
- CIESC Journal Issue S1, Pages: 63-68(2016)
- 作者机构：
  
  北京工业大学环境与能源工程学院, 强化传热与过程节能教育部重点实验室, 传热与能源利用北京市重点实验室,北京,100124
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160561
  CLC： K124
- Online First：31 August 2016，
  
  Published：31 August 2016
- 稿件说明：
移动端阅览
FU Weina, LIU Zhongliang, LI Yanxia, et al. Influences of primary nozzle diameter on steam ejector performance[J]. CIESC Journal, 2016, (S1): 63-68.
DOI：

FU Weina, LIU Zhongliang, LI Yanxia, et al. Influences of primary nozzle diameter on steam ejector performance[J]. CIESC Journal, 2016, (S1): 63-68. DOI： 10.11949/j.issn.0438-1157.20160561.

摘要

利用FLUENT软件对蒸汽喷射器复杂的内部流场进行数值模拟计算，并对喷射器内部流体流动过程中压力、速度等参数的变化规律进行分析研究，重点讨论了混合蒸汽压力和主喷嘴出口直径的变化对蒸汽喷射器引射性能的影响。结果表明：蒸汽喷射器存在一个临界出口压力，主喷嘴出口直径存在一个最优范围，此时喷射器的引射性能达到最佳，而且激波的耗散损失较小。

Abstract

The complex internal flow field of steam ejector was numerically simulated with commercial software FLUENT. The pressure and velocity variation of internal fluid in the flowing process were studied and analyzed. The influences of the mixing steam pressure and the outlet diameter of primary nozzle on the ejector performance of the steam ejector were discussed in a great length. It is found from the results that the entrainment ratio of the steam ejector remains constant first with the back pressure to its critical pressure and then decreases

nevertheless

the entrainment ratio initially increases sharply with the primary nozzle outlet diameter and then decreases after the outlet diameter exceeds a certain value. Therefore there exists a critical outlet pressure for the steam ejector that determines its operation states. The outlet diameter of main nozzle has an optimal range

in which the ejector obtains the best performance

and the dissipation loss of the shock wave is relatively small.

关键词

Keywords

references

Views

258

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

High-quality datasets for petrochemical industry in era of large language models: challenges and opportunities

Local deposition characteristics of CaCO3 fouling under different roughness element structures

Numerical simulation of two-phase steam ejector applied in novel loop heat pipe

Study on coupling operation characteristics of Stirling engine and high temperature heat pipe

Effect of methane explosion on distribution of pressure field inside and outside buildings

Related Author

LUO Mengjie

ZHAO Yunpeng

ZHANG Mengxuan

SHI Xiaogang

LAN Xingying

HAN Zhimin

ZHOU Xiangyu

ZHANG Hongyu

Related Institution

State Key Laboratory of Heavy Oil Processing, China University of Petroleum

School of Energy and Power Engineering, Northeast Electric Power University

Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, Xi’an Jiaotong University

School of Chemical Engineering and Technology, Xi’an Jiaotong University

State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University

⁰